Tweet
Time for me to sell my Genesis cat. The hull was purchased in 2015 and wasn't run last year, with the addition of two kids to the family hasn't left me much time for all my hobbies. The boat will come with a basic Proboat radio and servo, Hifei Swordfish 220A esc, and Leopard 4082 motor. The motor has one run on it. I have to double check the specs but I believe the motor was 1900kv and was used on a 4s setup. The boat retains all of the original running hardware including the 4mm driveline. I wanted to upgrade to the 3/16" but never got around to it. The esc has had the shrink wrap removed once as one of the cooling tubes seemed to be wiggling around and was inspected and found to be ok. The boat currently has 6mm bullet connectors but probably need to be soldered again, the solder joints weren't great. I will include the remaining bullet connectors and random props (all nylon) I have left. Now the bad, besides checking some solder joints, the motor mount needs a new hole drilled to be aligned correctly, there is some scratches in the finish from another boat hitting me and the prop scratching it, and could use some general TLC. It's worth noting that this boat has only been run in fresh water. Please inspect from the pictures attached and feel free to ask any questions.
Asking $275 for the setup and can give shipping quotes, which I'll split.
Asking $275 for the setup and can give shipping quotes, which I'll split.
Comment