Tweet
Too many boats on the shelves. Built this from balsa and thin ply from Dave Frank Oberto plans from years ago. Notice the offset ride pads? Seen better days, but was a good performer. The real draw for this is probably the hardware. Original Joe Solinger hydro set with .130 Hughey shaft stepped down to 1/8. Also has Hitec 85MG servo. Custom turn fin and bracket. Hull is 25 3/4" long and about 12 3/4" wide along the top. Tunnel is 7" and the hatch opening is 3 3/4". West Systems used throughout. As pictured it weighs in at 1lb 8.25oz. Originally used as N2 sport (with NiMHs!) years ago. Could be a fun little rocket with 2s or 3s setup. $65 OBO shipped in the lower 48. Outside the states possible. Just cover the extra over standard stateside shipping.