Tweet
abandoning this project . selling a nqd tear into project boat . everything is here to re assemble it .i done some the work for you .
i cut the hole
i removed the drive
i mounted the servo
i soldered a ec3 on the esc
i am letting the project go , you will need a new coupler ,i had to drill out the grub screw on the original leaving it useless .
what you will need to complete the boat .
brushless motor
coupler
rx/tx
the esc is a hobbyking 30 amp ,you will need a motor that works with this or buy new stuff to your liking .i have the original motor and all electronics if you want them but they are pretty much throw away stuff .have the original tx in the box as well .
i will throw everything inside the hull securely for shipping .let me know if you want the original motor and stuff .(original motor has rust on the casing )
you get a stand as well .
50.00 shipped . thanks
i cut the hole
i removed the drive
i mounted the servo
i soldered a ec3 on the esc
i am letting the project go , you will need a new coupler ,i had to drill out the grub screw on the original leaving it useless .
what you will need to complete the boat .
brushless motor
coupler
rx/tx
the esc is a hobbyking 30 amp ,you will need a motor that works with this or buy new stuff to your liking .i have the original motor and all electronics if you want them but they are pretty much throw away stuff .have the original tx in the box as well .
i will throw everything inside the hull securely for shipping .let me know if you want the original motor and stuff .(original motor has rust on the casing )
you get a stand as well .
50.00 shipped . thanks
Comment