Tweet
SOLD!!
Selling my MLBoatworks SGX 310 Sport 20 (P-Lim.)
Boat is built by me....built straight, square, flat with no twists! Interior has been sealed except for rear radio box area. Sponsons has foam flotation and rear right side sponson has a thick peice of alum epoxied in and is drilled and tapped for brand new Virginia Craftsman turn fin/bracket. Exterior just needs to be sealed/painted. No holes have been drilled for transom hardware or stuffing tube.
Includes 2 Brand new never used (storage charged) Giant Power Lipos - 2S 5000 65C, Brand New Virginia Craftsman turn fin and bracket, New Sppedmaster 20 mini rudder and round bottom strut/ bracket, Brand new Savox Waterproof servo, Brand new Hughey .150 flex cable with drive dog and prop nut, Brand new ABC 42X66 Prop (propwork done by Mark Sholund, Props 4 U), 1/4" stuffing tube w/ teflon liner, plenty of new OSE 5.5 bullet connectors w/shrink tubing, used but in great shape UL-1 ESC and UL-1 Motor with jacket (both esc and motor NEVER run hot...only Luke warm...both work great!)...basically all you will need is finishing epoxy/paint, water cooling line, water outlet, 4-40 rod for steering and your receiver!
SOLD!! (paypal preferred)for Boat and all parts shown in pics, shipped within the lower 48's only! Please, NO PM'S about the sale...I will not reply! Any questions are to be posted here on this thread.
First to say "I will take it!", gets it!
Also posted on other Boating sites...
Thanks!
-Kent
Selling my MLBoatworks SGX 310 Sport 20 (P-Lim.)
Boat is built by me....built straight, square, flat with no twists! Interior has been sealed except for rear radio box area. Sponsons has foam flotation and rear right side sponson has a thick peice of alum epoxied in and is drilled and tapped for brand new Virginia Craftsman turn fin/bracket. Exterior just needs to be sealed/painted. No holes have been drilled for transom hardware or stuffing tube.
Includes 2 Brand new never used (storage charged) Giant Power Lipos - 2S 5000 65C, Brand New Virginia Craftsman turn fin and bracket, New Sppedmaster 20 mini rudder and round bottom strut/ bracket, Brand new Savox Waterproof servo, Brand new Hughey .150 flex cable with drive dog and prop nut, Brand new ABC 42X66 Prop (propwork done by Mark Sholund, Props 4 U), 1/4" stuffing tube w/ teflon liner, plenty of new OSE 5.5 bullet connectors w/shrink tubing, used but in great shape UL-1 ESC and UL-1 Motor with jacket (both esc and motor NEVER run hot...only Luke warm...both work great!)...basically all you will need is finishing epoxy/paint, water cooling line, water outlet, 4-40 rod for steering and your receiver!
SOLD!! (paypal preferred)for Boat and all parts shown in pics, shipped within the lower 48's only! Please, NO PM'S about the sale...I will not reply! Any questions are to be posted here on this thread.
First to say "I will take it!", gets it!
Also posted on other Boating sites...
Thanks!
-Kent
Comment