Hpr99 completely built minus electronics for sale

[kfxguy]

I picked this boat up in a trade. I've always wanted one of these boats. Now I've lost interest in it and I got a nice little driving award the other day I'm sure is going to cost me a good bit so this has to go. It was built by Keith Bradley not sure how long ago for lonewolf. I went through it and fixed a few issues and tighten up all the screws and made sure everything is all sealed up. I'm not sure what hardware is on it but it looks high quality and German made. Carbon fiber motor mounts. I added battery trays because I didn't like the idea of using foam stuffed in there to hold them. It's complete right now. What I'm keeping:
Motors, collets, escs, servo, props and receiver.

What you get: hpr99 bulletproof hull, all hardware installed (strips, rudder, servo mount, motor mount etc) flex shafts, batter straps, water hoses will be left in it. You will get a carbon fiber hath and a Kevlar hatch for gps runs. The top side of the hull is in excellent shape. The bottom side has some minor gel coat cracks but the hull is carbon so the integrity of it is not compromised. This hull is very roomy, it swallows 4s packs like nothing and wil fot 6s packs easily. It also has stainless thumbscrews for the hatch retention. I'll take $750 shipping in the us or best offer. If you've ever priced this hull, you know why, it's a very well built hull. ******To be fair to anyone that's interested, whomever posts in this thread they will take it first has first dibs on it. ******


IMG_8944.jpg


IMG_8943.jpg


IMG_8942.jpg


IMG_8941.jpg



IMG_8945.jpg

[MG1234]

Can you please tell me the length and width of the hull? I have a fighter cat and a Zonda ,want something a little bigger thanks ,

[kfxguy]

Can you please tell me the length and width of the hull? I have a fighter cat and a Zonda ,want something a little bigger thanks ,

This is a 39" hull. It actually just measured 38.5" got tips to transom and 40.25" from tips to rudder. It's 9.25" wide. A zonda is a 42" boat but actually measures 41" on my tape measure (I have one on my build counter). It's 11.75" wide. This boat isn't a play boat, it's made to do one thing, go very fast straight. It does not handle well at low speeds. At least it didn't for me. I think my escs aren't in sync (cheap fly colors). I think I could getbit to run better if I had a good pair of escs, but I need to sell it at this point. If you want to go fast, this is it. If you want to play around, not a good choice. Just being honest. I never try to sugar coat something and sell someone something they don't want. I will tell you the truth about this, this hulls strength and build quality far exceeds the zonda hull and Fightercat hulls. The carbon you see in it isn't an inlay, that was done with the hull when payed up.

[kfxguy]

Btw, for a little more money I could leave the motors in it and the mbp collets. You could just throw in some sf220's and a servo and receiver and be running. The servo arm stays in it too. It has tp power 3650 2900kv motors. On 3s it would be an easy 70+ and on 4s it should surpass the century mark. The motors are new.

[MG1234]

Thanks for the info,I agree my other boats are not the best ,been looking for anouther ,

[Lone-Wolf]

For the record, I was the original owner of this boat, as Travis said, it's quality is amazing, nothing better for SAW type speeds for it's size. When I purchased it, it had Lehner 1950's in it with SF 220's, the price was $3900!!!! Whoever pulls the trigger on this one is getting an amazing deal, just want you guys to understand what you're looking at and what it's worth especially with Travis' very high quality touches added to it.

[kfxguy]

Thanks for the info,I agree my other boats are not the best ,been looking for anouther ,

I wasn't meaning it like that. Tfl/Fightercat boats are my go to boats. It's nice to have some really high end stuff in your fleet every now and then tho.

[MG1234]

That's cool,I'm looking for something different from my smooth water twins ,not familiar with this hull but I believe what you said ,I didn't realize the fighter cat is TFL, I bought it used here ,seems better quality than a genesis or Zonda ,looks the same as a genesis, I'll look at my budget and get back to you ,I'll need ESCs,props ,servo ,reciever,
Would this do ok,not top speed ,in the bay? Thanks ,

[kfxguy]

That's cool,I'm looking for something different from my smooth water twins ,not familiar with this hull but I believe what you said ,I didn't realize the fighter cat is TFL, I bought it used here ,seems better quality than a genesis or Zonda ,looks the same as a genesis, I'll look at my budget and get back to you ,I'll need ESCs,props ,servo ,reciever,
Would this do ok,not top speed ,in the bay? Thanks ,

Well here's the thing. I ran it this weekend and the escs weren't near enough for the motors. They got hot but I hit it for a second and it was ballistic. I don't think they were calibrated the same, on the bench one prop would start spinning way before the other. Sonit was pretty erratic at low speeds. I don't have the right props, escs or batts for it to get it dialed in. If your really interested in it, we can work a deal and I can include a receiver and a servo. Just pm me and we can discuss things further.

[Skeet]

I am interested sir. Couple of questions. Price with motors. Can decals be removed? Through hull cooling? Do you accept PayPal? Thanks

[kfxguy]

I am interested sir. Couple of questions. Price with motors. Can decals be removed? Through hull cooling? Do you accept PayPal? Thanks

Yes decals. Am be removed. I was going to do that just never did.
$200 extra for motors and mbp collets. I just paid $220 shipped for both motors and cooling jackets, and $70 for the mbp collets. I accept pay pal only. The cooling is picked up in the bottom of the rear of the sponsons.

[kfxguy]

I update the first post stating that whomever states I'll take it first in this thread is who has first dibs. I have people pming me about it so to be fair dealings need to discussed in the thread. I always try to be fair to people. Thx.

[Skeet]

I update the first post stating that whomever states I'll take it first in this thread is who has first dibs. I have people pming me about it so to be fair dealings need to discussed in the thread. I always try to be fair to people. Thx.

Sold, please send payment info

[kfxguy]

Sold, please send payment info

Sold. Thx