F/S JetChopper 30 Hull and Hardware

[Tamelesstgr]

Parting out this boat, here is part breakdown on what you get:

Jet Chopper 30 Hull: $100
Carbon fiber Inlay: $45
Carbon Fiber Motor mount 36-40mm (Comes with 36mm tail ring): $25
Carbon Fiber Transon doubler: $5
Carbon Fiber Battery Trays: $10
Battery Straps: $5
Dual Water cooling lines: $5
Dual Water ports: $5
TFL Servo Mount: $10
TFL Rudder: $20
TFL Trim Tabs: $20
TFL Turn Fins: $15
Speedmaster 3/16" Stinger: $40
OSE 3/16" Flex Cable: $22
Drive Dog and Prop nut: $5
Antenna Mount: $5
Rudder Linkage:$5
Removeable Flotation Mat: $10

Hull is 30" long, 35" with hardware, and 9" wide. Hull is solid, I reinforced the seams with carbon fiber and epoxy, tip of nose is filled with epoxy, hatch has stainless M3 screw hold down system

That's $352 in parts divided in half, I'll offer this for $176 plus shipping in lower 48. As you may have heard, I'm selling everything and going for a big gas mono. Any questions please let me know. You will need to install a new 1/4" stuffing tube (I will provide to you)

(New Price $210 Shipped lower 48)
(New Price $200 Shipped lower 48)

Ken

[Tamelesstgr]

Pictures:

20170711_222038.jpg

20170711_222042.jpg

20170711_222044.jpg

20170711_222051.jpg

[Tamelesstgr]

More pics:

20170711_222055.jpg

20170711_222059.jpg

20170711_222104.jpg

[Tamelesstgr]

More Pics:

20170711_222110.jpg

20170711_222114.jpg

20170711_222129.jpg

[Tamelesstgr]

Boat 4 weeks ago with 3674 - 2075kv on 4s, T180 esc and M545 Prop, it's very stable and settled in the water

https://www.youtube.com/watch?v=mJTEcKwq2PQ

[JJ1TRXSAton]

Interested. what would shipping be about to 90019? Thanks.

[Tamelesstgr]

Looks like nearly $50 to West Coast, if you want call it $220 shipped and if it's any less I'll refund you the difference.

usps.JPG

[Tamelesstgr]

Also, let me know if you are interested in a motor for this boat

[Tamelesstgr]

$210 shipped guys lower 48, this boat needs a home

[Tamelesstgr]

$200 shipped lower 48

[gsbuickman]

Rats, if I wasn't planning on picking up a pile of new spare parts for my King of Shaves I'd snatch this thing up

[Bp9145]

Boat 4 weeks ago with 3674 - 2075kv on 4s, T180 esc and M545 Prop, it's very stable and settled in the water

https://www.youtube.com/watch?v=mJTEcKwq2PQ

Hi Ken, I know you do a lot of data logging and such. So I'm pretty sure you probably kept logs with what speeds you got from this boat when experimenting with different setups. But with this setup what speeds were you getting? Also, I'm curious what was top speed you ever did with this boat and with what motor and esc? I might have a buyer for you but knowing him the first thing he is going to say is "will it go super fast and how fast". . .lol. that's all he cares about speed and price.

[Tamelesstgr]

Hi Ken, I know you do a lot of data logging and such. So I'm pretty sure you probably kept logs with what speeds you got from this boat when experimenting with different setups. But with this setup what speeds were you getting? Also, I'm curious what was top speed you ever did with this boat and with what motor and esc? I might have a buyer for you but knowing him the first thing he is going to say is "will it go super fast and how fast". . .lol. that's all he cares about speed and price.

Sent you a pm, send me your email and I'll share the data logs with you from the 4s setup I had in it.

[Bp9145]

Ken, I got your message but no data logs. . .if you can try again. Also, emailed you back. .

[Tamelesstgr]

Brian, replied to e-mail with speed and datalog charts, Ken