F/s pair of tp 4050 motors

[kfxguy]

I got these motors (4050 2050kv) in on trade from lone wolf a couple days ago. Well the boat I was going to use them for needs 36mm motors so I need to turn these over for cash to put towards 36mm motors. He says they were mainly ran on 4s in his cheetah and ran mid 70's and a few fast passes on 6s for 94mph. The only thing about these motors and Steve never noticed is one has the 8mm shaft in the rotor and turned down to 5mm, the other has the straight 5mm shaft through the whole motor. Didn't make a difference that he could tell and if he went 94mph with a cheetah I'd say that's impressive. Anyways, I'll take $150 shipped in the us for them or I'll split them for $78 each shipped in the us. Pay pal only please. They come with water jackets installed.

[Lone-Wolf]

Yes these are indeed excellent motors, always well cared for and only bought them less than a year ago for my dual Cheetah. Motors were never dunked, overheated or stressed, always ran cool or warm at the most. Definitely motors that can't be beat for the price Travis is asking. Interestingly enough, these motors were 5mph faster in the exact same setup than my pricey Lehner 1950 2090Kv motors!!

[luisoque]

What esc u use on it and what prop

[Keagan-Z06]

I'll take them. Can you put back on 6mm connectors and send with my other motors?

[Lone-Wolf]

When running 4S I was using either Swordfish 220's or Turnigy T-180's. For the very few SAW passes I made I was using MGM 25063's...overkill yes! Personally for 4S I would look for the older "version 2" T-180 esc's but the 220's are good but they just don't seem to last. Props for 4S I had good luck with ABC 1715's, keeping the bow down required batteries to be as far forward as possible with 3/4Lb of epoxy in the sponsons at the tips otherwise she will lift off with those ABC's especially if you go over 4S.

[kfxguy]

I'll take them. Can you put back on 6mm connectors and send with my other motors?

What kind of connectors? I think I only have 6.5mm. If that's not it send me a link for what you need

[Keagan-Z06]

Well whatever comes on those turnigy 180 amp. Lol, sending funds now.

[Keagan-Z06]

https://hobbyking.com/en_us/turnigy-...r-cooling.html

[Keagan-Z06]

Funds sent! I think those connectors are 6mm, I'm not sure though.

[kfxguy]

Sold to keagan.

[Keagan-Z06]

Thanks Travis!

[Keagan-Z06]

Received! Thanks