JAE mini rigger, modified

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fla350tt
    Senior Member
    • Nov 2011
    • 340

    #1

    JAE mini rigger, modified

    rebuilt and moved to new listing
    Attached Files
    Last edited by fla350tt; 02-15-2017, 06:18 AM.
  • fla350tt
    Senior Member
    • Nov 2011
    • 340

    #2
    make offers need this gone

    Comment

    • NativePaul
      Greased Weasel
      • Feb 2008
      • 2761

      #3
      I can't believe that this hasn't sold at the asking price. From my experience with the .21 the ski probably isn't needed. For those not racing (and I don't think there is a mini class in America) a HV system with low current is the ideal setup, this should only be pulling about 10A, very efficient! The only thing against it is the price of the ESCs and this has a great one included, at $175 that is paying for the kit and getting a half price ESC thrown in with it, and a free motor, free battery, free build.

      Tell me more about the carbon strut, it is too cool, how did you make it.
      Paul Upton-Taylor, Greased Weasel Racing.

      Comment

      • fla350tt
        Senior Member
        • Nov 2011
        • 340

        #4
        Originally posted by NativePaul
        I can't believe that this hasn't sold at the asking price. From my experience with the .21 the ski probably isn't needed. For those not racing (and I don't think there is a mini class in America) a HV system with low current is the ideal setup, this should only be pulling about 10A, very efficient! The only thing against it is the price of the ESCs and this has a great one included, at $175 that is paying for the kit and getting a half price ESC thrown in with it, and a free motor, free battery, free build.

        Tell me more about the carbon strut, it is too cool, how did you make it.
        Used a piece of 1/8" plate carbon fiber and 1" wide carbon fiber tape cloth. I epoxied the brass tube to the end of the carbon plate, then soaked the fiber tabe with epoxy pulled it tight around the plate and tube then sqeezed the tape to the plate with 2 aluminum pieces that I put some car wax on so the epoxy would not stick.
        And some sanding with a dremel.

        Comment

        Working...