Tweet
SOLD
I am selling this MHZ C5000 Mystic 33" Carbon/Kevlar cat. The boat was built by someone else, it has all MHZ parts,carbon motor mounts,High speed drives, rudder assy. and carbon servo mount. I also have carbon battery trays that were never installed. All I did was install a bigger rudder and paint the boat. The boat did not steer good at low speeds with the original MHZ rudder so I had a bigger one machined to fit the MHZ mount and then the boat steered great.The boat originally had bottom water pick ups but they did not work very good. So I filled them in and used the rudder pick ups. It has Pro boat A3650-1500kv motors, Seaking 120a esc's, esc program card, the original rudder and a brand new Savox 1251MG servo. The props are 3614 aluminium. I have 4 Glacier 3300 mah 6s batteries, they are over 2 1/2 years old if buyer wants them. The boat runs great on 6s and is in great condition. The hull had a lot of inconsistencies in the gel coat of the hatch grooves so when I was prepping the hull I filled them in. The paint is automotive with clear, this was my first time painting such a small detailed boat. There are a few runs in the paint and when I shot the 2nd coat of clear it ended up with tiny air bubbles. The bubble are so small that can not been seen in the pics and you have to look at the boat just right to see them. I am asking $525 plus shipping. I accept paypal. Make offers, I need this gone.
I am selling this MHZ C5000 Mystic 33" Carbon/Kevlar cat. The boat was built by someone else, it has all MHZ parts,carbon motor mounts,High speed drives, rudder assy. and carbon servo mount. I also have carbon battery trays that were never installed. All I did was install a bigger rudder and paint the boat. The boat did not steer good at low speeds with the original MHZ rudder so I had a bigger one machined to fit the MHZ mount and then the boat steered great.The boat originally had bottom water pick ups but they did not work very good. So I filled them in and used the rudder pick ups. It has Pro boat A3650-1500kv motors, Seaking 120a esc's, esc program card, the original rudder and a brand new Savox 1251MG servo. The props are 3614 aluminium. I have 4 Glacier 3300 mah 6s batteries, they are over 2 1/2 years old if buyer wants them. The boat runs great on 6s and is in great condition. The hull had a lot of inconsistencies in the gel coat of the hatch grooves so when I was prepping the hull I filled them in. The paint is automotive with clear, this was my first time painting such a small detailed boat. There are a few runs in the paint and when I shot the 2nd coat of clear it ended up with tiny air bubbles. The bubble are so small that can not been seen in the pics and you have to look at the boat just right to see them. I am asking $525 plus shipping. I accept paypal. Make offers, I need this gone.
Comment