Tweet
Well I have been intending to build this boat for a long time now but unfortunately I dont think its currently in my best interest to do so, thus I would like to hopefully sell it to someone whom would better take advantage of it.
This hull was designed and made in Germany by Chris Tonn and Peter Mühleck respectively, and it is an extremely high performance and high quality piece. Overseas this hull is commonly configured with 6s setups and has reached nearly 90mph despite being a 31" long boat. Its also very easy to setup and I can provide PDF files made by the designer for how its properly done, as well as a few diagrams.
Manufacturing this hull used very high quality materials, its all carbon fiber and white gelcoat, and 1/8" aluminum was installed at various points throughout the hull for the hardware and accessories. The boat itself is beautiful and should take very little work to be ready for paint or even minor touchups could be done to run the hull in its bare white.
Included with the boat is a rear wing set, rear carbon cover tray and a carbon windshield cut out for the cockpit.
To purchase one of these hulls and have it shipped from Germany will run you about 450$, in addition to taking about 3 months to recieve due to Peters waiting list. Im willing to part with this for 325$ plus shipping, however im open to offers. Main things im looking for are high powered ESC's (8s and up) and motors, and scale hydro stuff.
thanks
SOLD to Wayne
20160823_204857.jpg20160823_204912.jpg20160823_204924.jpg20160823_204946.jpg20160823_205240.jpg
This hull was designed and made in Germany by Chris Tonn and Peter Mühleck respectively, and it is an extremely high performance and high quality piece. Overseas this hull is commonly configured with 6s setups and has reached nearly 90mph despite being a 31" long boat. Its also very easy to setup and I can provide PDF files made by the designer for how its properly done, as well as a few diagrams.
Manufacturing this hull used very high quality materials, its all carbon fiber and white gelcoat, and 1/8" aluminum was installed at various points throughout the hull for the hardware and accessories. The boat itself is beautiful and should take very little work to be ready for paint or even minor touchups could be done to run the hull in its bare white.
Included with the boat is a rear wing set, rear carbon cover tray and a carbon windshield cut out for the cockpit.
To purchase one of these hulls and have it shipped from Germany will run you about 450$, in addition to taking about 3 months to recieve due to Peters waiting list. Im willing to part with this for 325$ plus shipping, however im open to offers. Main things im looking for are high powered ESC's (8s and up) and motors, and scale hydro stuff.
thanks
SOLD to Wayne
20160823_204857.jpg20160823_204912.jpg20160823_204924.jpg20160823_204946.jpg20160823_205240.jpg
Comment