HULL, RUDDER AND OUTDRIVES ARE SOLD
PARTS HAVE GONE UP FOR SALE IN NEW THREADS
92" RADTEK HPR HULL,UNTOUCHED, with hardware ( custom CNC rudder, hydraulic arms for steering and custom CNC stingers)
Hull already has CF inlay done
This is some of the hardware I have, I'll give a complete listing tonight
(2) LMT 3080 5 wind, 10mm shafts, never run. $1450 shipped to USA.
(2) MBP 10 X 6.3 mm collets $60
(7) .250 flex cables ;
(3) OCTURA .250 X 24" 1 LEFT, 2 RIGHT LAY
(4) HUGHEY .250 X 30" long, 3 REV AND 1 STD
$20 ea for Octura, $40 ea for Hughey
(4) 7s HV 5500mah 70C SILVER LABEL REVO lipo's, very slightly used, $375
(1) custom 3mm under cowl carbon reinforcement plate $175
(1) custom made cockpit windshield and outer carbon fiber frame $200
(1) 50" x 72" custom purple CF inlay uncut $140
(1) 49" x 172" custom lightweight cf cloth (reinforcement) $120
(1) 8.94mm thick x 12" x 24" carbon fiber sheet to make 2 motor and battery mounts $200
(2) 3.93 mm thick carbon fiber motor mounts already cut for any motor bolt pattern (you drill it) $100
(1) custom ESC and Dual Servo mount from a member here on OSE (KENT @ CUSTOM CF PARTS) $485
(2) MGM TMM 40063-3 X2 controllers: $925 each or $1800 for the pair
BARE CUSTOM
PARTS HAVE GONE UP FOR SALE IN NEW THREADS
92" RADTEK HPR HULL,UNTOUCHED, with hardware ( custom CNC rudder, hydraulic arms for steering and custom CNC stingers)
Hull already has CF inlay done
This is some of the hardware I have, I'll give a complete listing tonight
(2) LMT 3080 5 wind, 10mm shafts, never run. $1450 shipped to USA.
(2) MBP 10 X 6.3 mm collets $60
(7) .250 flex cables ;
(3) OCTURA .250 X 24" 1 LEFT, 2 RIGHT LAY
(4) HUGHEY .250 X 30" long, 3 REV AND 1 STD
$20 ea for Octura, $40 ea for Hughey
(4) 7s HV 5500mah 70C SILVER LABEL REVO lipo's, very slightly used, $375
(1) custom 3mm under cowl carbon reinforcement plate $175
(1) custom made cockpit windshield and outer carbon fiber frame $200
(1) 50" x 72" custom purple CF inlay uncut $140
(1) 49" x 172" custom lightweight cf cloth (reinforcement) $120
(1) 8.94mm thick x 12" x 24" carbon fiber sheet to make 2 motor and battery mounts $200
(2) 3.93 mm thick carbon fiber motor mounts already cut for any motor bolt pattern (you drill it) $100
(1) custom ESC and Dual Servo mount from a member here on OSE (KENT @ CUSTOM CF PARTS) $485
(2) MGM TMM 40063-3 X2 controllers: $925 each or $1800 for the pair
- This is a copy of the actual invoice for what I paid for them.
- I have one usb programming cable AND a cc11 connector for them.
BARE CUSTOM
TMM 40063-3 for Race Boats X2-SERIES
|
$729.28 | 1 | $940.90 |
- Subtotal:
$940.90 - Shipping cost:
$12.65 - Grand total:
$953.55
Comment