Tweet
Hey guys,
I built this one last year to run at time trial events, mainly for something to do while I waited for the waves to lay down for my SAW boats lol, not an oval guy. I ran the boat at three different events, I live on a lake and have never ran it here. It just sits so I decided it needs a new home.
It was a carbon/Kevlar hull when I started. I added a layer of carbon to the hull and two layers on the hatch. I modeled it after the world famous Mr. Tony's cheetah since his ran so great. It has TFL dual pickup rudder, TFL skeg strut, kintec motor mount and ring, 300mm carbon fiber battery trays and straps, Savox waterproof servo and will include the .187 flex for the boat. You will just need motor, collet, esc and your radio and batteries.
I have done nothing to dial this boat in. I have not modified the ride pads but I did have to sand the hatch and opening because of a very tight fit. If I were to keep it I would blueprint the bottom, shorten the rudder a little and sharpen the edges. These are great running oval boats or an awesome lake basher. Due to the added weight of reinforcements I wouldn't recommend this as a 4s boat, not that it's heavy, just for a fast 4s boat I keep them light as possible.
Hatch bolts and seal are installed and a couple extra thumb screw are included in case you lose one. There is a chip by one of the hatch bolt holes, don't know what happen and what looks like an air bubble in the gelcoat on the edge of one of the ride pads, came that way, see pics.
Asking $375, buyer pays actual shipping. PayPal only please. I will package and ship as soon as I receive payment. Listing it here first but I will be listing other places. Thanks guys
Hit the limit on pics, continued in next post...
I built this one last year to run at time trial events, mainly for something to do while I waited for the waves to lay down for my SAW boats lol, not an oval guy. I ran the boat at three different events, I live on a lake and have never ran it here. It just sits so I decided it needs a new home.
It was a carbon/Kevlar hull when I started. I added a layer of carbon to the hull and two layers on the hatch. I modeled it after the world famous Mr. Tony's cheetah since his ran so great. It has TFL dual pickup rudder, TFL skeg strut, kintec motor mount and ring, 300mm carbon fiber battery trays and straps, Savox waterproof servo and will include the .187 flex for the boat. You will just need motor, collet, esc and your radio and batteries.
I have done nothing to dial this boat in. I have not modified the ride pads but I did have to sand the hatch and opening because of a very tight fit. If I were to keep it I would blueprint the bottom, shorten the rudder a little and sharpen the edges. These are great running oval boats or an awesome lake basher. Due to the added weight of reinforcements I wouldn't recommend this as a 4s boat, not that it's heavy, just for a fast 4s boat I keep them light as possible.
Hatch bolts and seal are installed and a couple extra thumb screw are included in case you lose one. There is a chip by one of the hatch bolt holes, don't know what happen and what looks like an air bubble in the gelcoat on the edge of one of the ride pads, came that way, see pics.
Asking $375, buyer pays actual shipping. PayPal only please. I will package and ship as soon as I receive payment. Listing it here first but I will be listing other places. Thanks guys
Hit the limit on pics, continued in next post...
Comment