Fast shockwave 26 v3 for sale (green one)

[kfxguy]

I'm trying to make room in my shop for more boats so I'm selling a couple. I built this for my kid and just ended up going too fast for him so I bought him another boat. I hate to see this one just collect dust on my shelf so it's on the chopping block. The lowdown: it's been modified to have a wet well so the strut is actually adjustable. From the factory it's not adjustable. I also changed the drive tube and put in a 3/16 flex. The motor is a castle 1415 2400kv and has a Seaking 120 esc. I also upgraded the turn find and trim tabs to more appropriate units due to the speeds this thing travels at. It goes 50ish on 3s and 60+ on 4s. Fun little boat but just have too many right now. I can do this a couple different ways. I can sell it complete as is and you put your receiver in and go for $250 plus split the shipping or I can knock $100 off if I put a 1800kv 36mm proboat 6 pole motor in and a suitable esc. Comes with a CNC prop that puts it In the mid to high 50's on 4s. With an abc 1615 (not included) it runs low 60's although it's much more stable at 55ish. This boat is very low use. I bought esc and motor brand new. Maybe 5-6 runs.















Video on 3s

https://youtu.be/r35tpNh0sXs

And 4s

https://youtu.be/xh5BH5HHwsI

[Bp9145]

hey Travis, if I choose to go with the 1800kv proboat motor what esc would you match it up with? Also, how much without motor and esc? I'm interested so I'll make my decision after I get my answer.
thanks,
-Brian

[kfxguy]

hey Travis, if I choose to go with the 1800kv proboat motor what esc would you match it up with? Also, how much without motor and esc? I'm interested so I'll make my decision after I get my answer.
thanks,
-Brian

I honestly don't want to sell just hull and hardware. I'm trying to get what I can out of it and keep it in its ballistic form.....because it's a highly modded setup and intended to go fast. I'll see what I have as far as esc goes but I think I have a 60 or 80a hobbyking esc. I recommend getting it in the full kill mode as its already a matched setup and won't be near as fast with the lesser motor in it. If I had to sell it without the electronics then it's not really worth selling, i have a lot of time and money in it.

[Bp9145]

The reason I asked is because I have all, the same electronic components that you have. . .how about the the 1800kv motor only, no esc. . .can you do less than $150?. . Then you don't have to worry about the esc. . . .

[kfxguy]

The reason I asked is because I have all, the same electronic components that you have. . .how about the the 1800kv motor only, no esc. . .can you do less than $150?. . Then you don't have to worry about the esc. . . .

Basically I'm giving the lesser motor and esc with the boat for free, may I should have put that in my original post.... They lesser motor and esc have no value to me, they are just spare stuff I have sitting around. I feel hull and hardware is easily worth $150. It's set and setup right. It's a proven 60+ setup on 4s. You can't go to your hobby shop and get this boat like this. What's done to it (just the 3/16 flex and flooded tube) makes it much faster and better than a stock boat then add in better turn fins and trim tabs....unfortunately I won't give it away. I'd rather keep it than do that. It's a fun little pond rocket.

[kfxguy]

This is the esc I have for it to go with the proboat motor. I still would rather the boat go as is.

[Bp9145]

Hi Travis, I know with a proboat 1800kv motor and aquacraft esc you want $150. . . would you consider $125? Give it some thought and let know. Also, the ABC 1615 prop that is a 3 blade yes? Thank you

[kfxguy]

Hi Travis, I know with a proboat 1800kv motor and aquacraft esc you want $150. . . would you consider $125? Give it some thought and let know. Also, the ABC 1615 prop that is a 3 blade yes? Thank you

I'll do it for $125 plus $15 shipping and I'll include the proboat motor but no esc. Servo included too. CNC prop. The abc prop that I used is a two blade but not included.

[Daniel Courtemanche]

Is it go

[kfxguy]

Is it go

What?

[Keagan-Z06]

he probably meant to ask if the boat is gone already. lol

[kfxguy]

No I still have it. Thinking about not selling it though. I may just tone it down and give it to my older son.

[bh_trade]

Does this include the factory 2.4 tx/rx?

[kfxguy]

Does this include the factory 2.4 tx/rx?

Yes I'll include a receiver. I'm pretty sure I have the factory transmitter for it too.

[kfxguy]

Does this include the factory 2.4 tx/rx?

It does have the factory one in it. $225 plus a couple bucks shipping and its yours