Hey guys,
Just finished this one up, built it to sell. All parts are new. Here's a list of components.
Fightercat Daytona hull 37"
110mm stingers
TFL rudder (cut down)
TP Power 4040's 2750kv
Seaking 160a low profile escs
Bluebird low profile servo
Custom 3mm carbon plate motor and servo mounts
Stainless counter sunk hatch bolts
Thru hull water pickups
Counter rotating .187 flex/shafts
Carbon fiber battery trays with straps
5.5mm bullets on the battery leads
Two layer inlay, hull and hatch
Two part foam up front for flotation with a black neoprene plug for a clean look.
This one turned out awesome, I love it. Very strong build, rock solid. I built her to run on 4s, she should cruise in the 70's on 4s, knock on 90 on 5s for some speed passes. Two layer inlay pretty far up in the bow, very strong boat. It is a raw hull (gelcoat) you can run her the way she is or paint it. I might be able to setup a painter if you're interested. I did sand the rear ride pads a little to flatten them. Again, all parts are new, this is a fresh build.
This is the fifth Daytona I've built, a couple of the ones I've sold belong to fellow members of the forum here. This is a very clean build with a lot of attention to detail. I want $1200 shipped CONUS, PayPal only please. International shipping is possible and we could work it out. Please feel free to ask questions but the first "I'll take it" has dibs to avoid any problems. I will be posting this in other places and will try to be as fair as I can on who gets it.
Thanks fellas,
Shawn




Just finished this one up, built it to sell. All parts are new. Here's a list of components.
Fightercat Daytona hull 37"
110mm stingers
TFL rudder (cut down)
TP Power 4040's 2750kv
Seaking 160a low profile escs
Bluebird low profile servo
Custom 3mm carbon plate motor and servo mounts
Stainless counter sunk hatch bolts
Thru hull water pickups
Counter rotating .187 flex/shafts
Carbon fiber battery trays with straps
5.5mm bullets on the battery leads
Two layer inlay, hull and hatch
Two part foam up front for flotation with a black neoprene plug for a clean look.
This one turned out awesome, I love it. Very strong build, rock solid. I built her to run on 4s, she should cruise in the 70's on 4s, knock on 90 on 5s for some speed passes. Two layer inlay pretty far up in the bow, very strong boat. It is a raw hull (gelcoat) you can run her the way she is or paint it. I might be able to setup a painter if you're interested. I did sand the rear ride pads a little to flatten them. Again, all parts are new, this is a fresh build.
This is the fifth Daytona I've built, a couple of the ones I've sold belong to fellow members of the forum here. This is a very clean build with a lot of attention to detail. I want $1200 shipped CONUS, PayPal only please. International shipping is possible and we could work it out. Please feel free to ask questions but the first "I'll take it" has dibs to avoid any problems. I will be posting this in other places and will try to be as fair as I can on who gets it.
Thanks fellas,
Shawn





Comment