F.s. New `hitec 645-mg servos'!!!

[K.R.Joye]

Selling large qty of items for a good friend.

(1) Brand New High-Torque 'HITEC 645-MG SERVO' for turning those large boat rudders! Includes hardware kit. ***SOLD***

SPECIFICATIONS:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.24sec/60° at no load
Operating Speed (6.0V): 0.20sec/60° at no load
Stall Torque (4.8V): 106.93 oz/in. (7.7kg.cm)
Stall Torque (6.0V): 133.31 oz/in. (9.6kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8.8mA/idle and 350mA no load operating
Current Drain (6.0V): 9.1mA/idle and 450mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears and 1 Resin Metal Gear
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
Weight: 1.94oz. (55.2g)


(2 Available) Brand New High-Torque`HITEC 625-MG SERVOs' for turning large boat rudders! Includes hardware kit.
SERVOS will be listed on 2 sites so don't waste time! ***1 SOLD**

Specifications:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.18sec/60° at no load
Operating Speed (6.0V): 0.15sec/60° at no load
Stall Torque (4.8V): 76.37 oz/in. (5.5kg.cm)
Stall Torque (6.0V): 94.43 oz/in. (6.8kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 450usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
Current Drain (6.0V): 9.1mA/idle and 500mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: 3 Metal Gears and 1 Resin Metal Gear
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
Weight: 1.94oz. (55.2g)


Retail $30+
Asking $19.75 Each Shipped CONUS

Pay Pal Welcome
Respond to this post `I'll take it!'

[Hotrods]

I will take two

[K.R.Joye]

Sorry 3 are 625s 1 is a 645

[Hotrods]

I will Take the 645 and a 625 then

[K.R.Joye]

Ok $39.50 will pm u my pp info

[CajunCanuck]

I'll take the other 625. PM me info, and I'll send over the cash on Sunday when I get back home.

Sent from my Nexus 6 using Tapatalk

[K.R.Joye]

There are (2) 625s available, you want 1 or 2?

[CajunCanuck]

Thought there was only one available....I'll take both of em....

Sent from my Nexus 6 using Tapatalk

[K.R.Joye]

Ok $39.50 will pm u my pp info


********ALL SOLD**************

[CajunCanuck]

Funds sent via paypal

[Hotrods]

Money sent through paypal

[K.R.Joye]

Thx guys should go out USPS tomorrow

[K.R.Joye]

USPS Tracking for servos

Charles Faulconer #9500 1103 5771 6088 2089 15

Norman Hill #9500 1103 5771 6088 2089 22

[CajunCanuck]

Excellent...Thx.....