*PAIR* Lehner 3040/7LK

[keithbradley]

SOLD Used pair of Lehner 3040/7LK with jackets for sale. 1500kv in Delta configuration or 867kv in Wye configuration. Wye wiring connections included. Great setup for 12s twin powered boats (100mph+). Flat spot milled on shaft for use with pretty much any collet system.

REDUCED 04/03/16: $900 Shipped takes the pair.

[Thomas Schlarb]

Retaking offer. Need a single motor setup. Thanks tho..

[Dastuffuwant]

Maybe interested in the other without jacket

[keithbradley]

Selling as a pair, unless two guys want to "go in" on them and split them. In my world almost everything is a twin, so selling one is of no benefit to me.

[keithbradley]

Still available guys!
This pair is easily capable of 100mph+ on 12s in a large cat (~50'"+). It's time for somebody to step up to Lehner power.

[keithbradley]

Ok, this is the longest I've ever seen a good pair on Lehners last here in the for sale section!
Price reduced,$900 shipped takes the pair.

[keithbradley]

Still available...

[Leeandre]

Keith where can I get a mount for these motors if I wanted to run them in single set ups ?

[Leeandre]

For instance I have mounts to hold 56 series motors

[keithbradley]

Lee, they have a dual bolt pattern, one of which is the same 30mm spread m4 that a 56mm motor would use. However, these are 60mm diameter. Lehner water jackets are quite thin so I wouldn't be surprised if they fit the same mount as far as width and front plate bolt pattern goes. If you have a 56mm rear support ring you would have to replace or machine it out to 60mm.
There are 30 series specific mounts as well. MBP carries them, as well as most Euro suppliers, and last I checked I think Rocket City had them.

[keithbradley]

bump

[Dastuffuwant]

I'll take them