Brand New, never used MGM 25063-3 X2 Series ESC (for boats)

[nichismo]

Controller is still brand new and has never been used or programmed since being purchased and shipped direct from MGM in Czech Republic. Was configured with alot of bells and whistles, and ive also got the cord and USB COM4 device, along with the mini CD-Rom drive for your computer to easily program all parameters and features the ESC has. Normally the controller had 6 cables soldered for use with Lehner motors, but its now been braided and soldered into pairs to make 3 connections so it can be used with more common motors here in the States.

This is a really good deal for one of the most powerful and capable ESC's on the market, not to mention skipping the assembly/manufacturing time and overseas shipping if you were to order direct from MGM.

Heres some of the specifications and features:

- Max. continuous current (for full throttle) - 250amps with a 360amp 5 second surge

- Operating voltage - 12-63 volts for 4-15s lipo

- ON/OFF Switch

- WP version (increased protection against water)

- large watercooled heatsinks

- Design with 6 power conductors for Lehner motors

- Motor Temp Sensor

- LMT MP JET 6.0mm Soldered on all cables (will include corresponding extra connectors to solder to your motor)

- Possibility of operation with sensors motors

***SOLD***

20151207_140918.jpg20151207_140949-1-1.jpg20151207_141008.jpg

[nichismo]

PRICE DROP

I absolutely NEED to get rid of the ASAP people, help me out here!

[kfxguy]

Trades?

[nichismo]

the urgency is due to cash requirements, but im open to any offers!

or cash + item combos, etc.! (particularly fond of scale and large hydro stuff!)

[kfxguy]

Ok man, sorry I can't help you in the cash dept. I had some brand new esc's in the box (sf300 lite and a mgm 25035-3) but sounds like those won't help you. I've been wanting one of these to finsh off the looks of my shocker so I thought I'd give it a shot. Thx tho!

[nichismo]

well actually thats not a bad offer at all, that could actually be quite useful to me....

can you list the specs on that mgm?

Basically I have a current 8th scale build right now thats missing an ESC, and I have a 1/6 scale hull in the mail due to be here in a few weeks. I was planning to use the MGM 25063 in the 6th scale, but id rather use the funds for it elsewhere, and basically if I sold it, I was going to get the SF300 to replace it......

[kfxguy]

well actually thats not a bad offer at all, that could actually be quite useful to me....

can you list the specs on that mgm?

Basically I have a current 8th scale build right now thats missing an ESC, and I have a 1/6 scale hull in the mail due to be here in a few weeks. I was planning to use the MGM 25063 in the 6th scale, but id rather use the funds for it elsewhere, and basically if I sold it, I was going to get the SF300 to replace it......

Well I'm not so sure it would be a fair trade on my end if I swapped you both for that one (if that's what your thinking). I know your needing $$ but to be fair for me if you wanted both, I feel that some $$ would need to be added to yours. The mgm I have is:

25035-3 x2 lite
250a continuous
8s max
Dual power conductors on the motor and battery cable
Water protection

Both esc's have never had anything soldered to them. Iirc the mgm was around $350 and the sf300 was $280


If you throw in $50 I'll do it. Here's some pics. I adding some carbon that comes off easily if you want....to make it look better.

[K.R.Joye]

MGM Trades/Cash

I'm willing to work with you for that 25063-3 MGM!

I have a few expendable items you could pick and choose from for your projects:

1) Used(3 runs) Swordfish 240HV ESC w/program box(for 8th scale)
2) `New' Big-Screamer water-cooled outrunner(for 6th+ scale)
3) `New' FighterCat 400HV ESC (mislabeled as 300/they only made a few of these)
4) Octura Props, Sharpened, Balanced, Detounged for Big Hydros
.... a) X455/2 & X455/3
.... b) X457/2 & X457/3
.... c) X460/2 & X460/3
5) combo of above with up to $100 cash

Send me an email if your interested; [email protected]
Thanks,
Ken

[kfxguy]

Lemme know your thoughts. I can ship tomorrow. I also have the program cable and adapter if you need it. Sf300 will come with a usb link.

[kfxguy]

Hello?

[K.R.Joye]

What happened, I put together a nice offer and not a peep. Hope the mob didn't catch up with him....

[nichismo]

Jeez guys im sorry, I thought I replied here and was totally waiting for a response to that nonexistent..... yeah. lol

I need cash, so unfortunately for now I cant accept the trades presented.... Im still interested in the MGM controller however if you still have it KFX and its still new, if you perhaps end up with some spare cash to throw in with it im sure we could make a splendid deal.....

[kfxguy]

I'm interested. Tell me what's a fair deal for you.

[kfxguy]

If you keep responding this slowly then this is going to be a long process. I'm leaving for Minnesota in a few days for surgery and I'm not going to be able to ship for a few weeks so if your interested in doing something, let's get this ball rolling.

[nichismo]

Edit:

***SOLD***