32" Mono Swordfish 200 pro+ tp4060

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mtbenjamin77
    Senior Member
    • Jul 2010
    • 761

    #1

    32" Mono Swordfish 200 pro+ tp4060

    Fighter cat racing bling rocket
    SF 200 pro+ ESC
    TP 4060 motor
    Prop in picture is not included
    Hardly used I built this then turned my focus to tunnel hulls and haven't touched it since. No one in my area runs mono anymore
    $450 shipped conus
    Contact me for shipping quote outside the US

    image.jpg
    image.jpg
    image.jpg
    image.jpg
    image.jpg
  • Leeandre
    Senior Member
    • Nov 2014
    • 274

    #2
    Hi what kv motor and prop are you running ? I am guessing 4s and lastly what speeds were you seeing ? Thanks .

    Comment

    • mtbenjamin77
      Senior Member
      • Jul 2010
      • 761

      #3
      If I remember correctly the motor is a 2040 kv and when tested I ran a m447 detounged and 1.8 cup.

      Comment

      • mtbenjamin77
        Senior Member
        • Jul 2010
        • 761

        #4
        Prop was also cut down to 46. I only ran a handful of times before it became shelf queen. At the time I was building boats for several local guys and their focus turned to tunnel hulls. It always seemed to work out so that by the time I had a chance to build one for myself everybody else had moved on to something else.

        Comment

        • Leeandre
          Senior Member
          • Nov 2014
          • 274

          #5
          Is this set up to run on 6s or 4s. And I was wondering I have 4070 TP motor 1650 kv ,can that esc support it . Oh and you never gave me an average speed ,.

          Comment

          • mtbenjamin77
            Senior Member
            • Jul 2010
            • 761

            #6
            Sorry. I was running 4s the swordfish 200 pro+ is a 200 amp ESC with data logging I would assume you'd be fine on 6s with a 1600 kv but check the data logging and watch your prop size/pitch. I never gps'd any speeds so I won't quote numbers

            Comment

            Working...