Garage Sale

[riptide1]

I have these parts up for sale from top left to right, then bottom left to right....

-antennas with through hull mounts and black rubber caps - $6 for both -SOLD

-Water Cooling Part Lot - $20
-ESC heat sinks with 2 part thermal epoxy for water lines
-6.8mm Through Hull Ring Plated aluminum dress up ring for water line exit. Has a 6.8mm (.268") inside diameter.
-Great Planes 5/32 (3mm) Line Clamps
-Kintec thick wall silicone tubing yellow 3mm inside diameter and 7mm outside diameter. 2 1/2 feet
-Short pieces of thick wall silicone tubing with some aluminum couplers/extension pieces, this tubing is slightly larger then the Kintec
-Dual Transom Mount Water Pickup Machined aluminum with brass fittings.
-Qty. water outlets for 3-4 mm tubing

-Push rod parts - $6
-Sullivan Aluminum Quick Release Ball Links 4-40
-Great Plains 4-40 Push Rod Connectors
-Large Push Rod boot -SOLD

-Speed Master 40/60 Transom Bracket with Std. Bearing Block, just need to add Control Horn $12 -SOLD

http://www.rossisales.com/40RUDDERS.html

-Speed Master 1" x 1 1/2" Trim Tab Set $12 -SOLD

-Speed Master 60 Rudder Dual Pickup, cut for SAW racing $10 -SOLD

-Pair of FC 3/16" Mono Stingers - 78mm $30 -SOLD

-Hughey Rc Marine Flex Shafts Assembled .150" x 2-3/4" with Octura Drive Dog 3/16 in. ID x 3/8 in. OD.
(1) RR and (1) LR | Lightly used pair | 9.5" long $20 for the pair

-Qty. 6 Rubycon 35v 1000uf Capacitors - $4

Free shipping in the US. International shipping calculated by country http://ircalc.usps.com/
PayPal payment
002.jpg

[trigger]

I'll make an offer on the trim tabs and rudder transom mount for $20 shipped.

[gohan]

I'll take both antennas $6. Thanks

[srislash]

Is the flex in the pkg a 3/16" or 150? I would be interested in a pair of rr&lr flexes as well as the one in the pkg if 3/16, the large rubber boot, and the shortened rudder blade.
Also are there stingers I see in the pic and if so are they 1/4" per chance?

Shawn

[RCKong]

I'm looking at the short pair LR & RR are they .150 or .187 ?

[Pooley]

Also interested in a pair of LR & RR and also want to know if they are .150 and the stringers if they fit

[riptide1]

Yes that's ok. Thanks

I'll make an offer on the trim tabs and rudder transom mount for $20 shipped.

[riptide1]

I'll take both antennas $6. Thanks

Thanks

[riptide1]

Hi Shawn,

The flex cables are all .150, do you want the rubber boot, and shortened blade? The stingers are FC 3/16" Mono Stingers - 78mm. Thanks

Is the flex in the pkg a 3/16" or 150? I would be interested in a pair of rr&lr flexes as well as the one in the pkg if 3/16, the large rubber boot, and the shortened rudder blade.
Also are there stingers I see in the pic and if so are they 1/4" per chance?

Shawn

[riptide1]

They are .150 Thanks

I'm looking at the short pair LR & RR are they .150 or .187 ?

[riptide1]

The cables are .150 and work with the stingers. I will sell you a LR & RR pair plus both stingers for $45 shipped. Thanks

Also interested in a pair of LR & RR and also want to know if they are .150 and the stringers if they fit

[TRUCKPULL]

The cables are .150 and work with the stingers. I will sell you a LR & RR pair plus both stingers for $45 shipped. Thanks

Brian
I will take that deal if Pooley dose not.

Larry

[srislash]

Hi Shawn,

The flex cables are all .150, do you want the rubber boot, and shortened blade? The stingers are FC 3/16" Mono Stingers - 78mm. Thanks

Ok I'll take a pair of cables, the rubber boot then and the shorty rudder blade. PM me a paypal and a total when you get a chance Riptide

I should add that shipping is to Vancouver, Canada

[gohan]

Thanks

Payment sent. Thanks

[trigger]

Payment sent, thanks.