*mgm esc 25063-3 x2-series brand new*

[nata2run]

BRAND NEW NEVER USED!! with all the glamour installed
This is a very powerful unit from MGM. It can be used in most boats that will fit the size. Its a perfect candidate for any twin from 50" up to 75" (or 1300 to 1800mm) Would also work well in monos/hydros from 40" and up to 55" (all relative and depending on your setup of cause)


Selections for this ESC is:
- CC11 - connecting cable between controller and USBCOM4

- Possibility of operation with sensors motors

- ON/OFF Switch

- WP version (increased protection against water)

- Design with Water-Cooled Heatsinks

- Power Conductors 6.0 mm2

- Design with 6 power conductors to motor (recommended for Lehner motors)

- Motor Temp Sensor

- LMT MP JET 6.0mm Soldered on cables


$650 Shipped anywhere in the world!!


(SHOP PRICE $736.11)

MGM 25063-3 X2 single small.jpg

[arang2000]

https://www.mgm-controllers.com/race-boats/speed-controllers-escs-1/tmm-25063-3-for-race-boats-x2-series.html

[nata2run]

Yup that's it then ad shipping

[nata2run]

These are the actual options from MGM (the "World" site that don't include VAT) Price excludes shipping but was 65 euro from memory.

*MAKE ME AN OFFER I NEED TO MOVE THIS

MGM options.jpg

[nata2run]

price drop $620 shipped to you

[nata2run]

Anyone? Make an offer...

[nata2run]

$595 before she goes on eBay, seriously a cool controller way under retail price!!! This is a must sell for me to make room for something else.

[nata2run]

Make an offer, need this gone to make room for a new build...

[Fast One]

Hi nate, I have 2 seperate questions for your consideration.

1. I am in Australia and was wondering what price you would do this ESC for in AUD with postage to NSW 2898.
Don't be alarmed when you find out where that is, we are still part of NSW.

2. Can I contact you about some Castle Ice 200 amp ESC mounts and fan cooling plates?. I have an idea in mind and are great with pencil and paper but no good with CAD programs.
Do you machine alluminium as well?.

Thanks Shane.

[nata2run]

Hi regarding esc, I can do $800 Aussie posted to you. As for aluminium milling I can do some plate up to about 8mm you can send me a pm. ��

[nata2run]

SOLD locally!