LMT 2250/8 new

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • depeche_mode
    Senior Member
    • Jun 2012
    • 144

    #1

    LMT 2250/8 new

    Too busy to mange sales.



    Hello

    2 new LMT 2250/8 with fan

    new never run

    One has 6mm LMT bullets installed and water jacket.

    One just got here in the mail.



    $375.00 each shipped to the 48

    not for sale as individuals.
    No trades PLEASE20151001_132838.jpg
    Last edited by depeche_mode; 10-16-2015, 07:32 PM.
  • dethow
    Wired Racing
    • Oct 2014
    • 1500

    #2
    Looks like 8mm shaft... Is that correct?
    If so and you decide to split them up, I'll take one.
    I'd be willing to pay $380 to help cover shipping.
    Last edited by dethow; 10-01-2015, 07:36 PM.
    Have fun with that....

    Comment

    • Leeandre
      Senior Member
      • Nov 2014
      • 274

      #3
      Excuse my lack of knowledge but how does this compare to say a TP 5670 950 kv

      Comment

      • dethow
        Wired Racing
        • Oct 2014
        • 1500

        #4
        Originally posted by Leeandre
        Excuse my lack of knowledge but how does this compare to say a TP 5670 950 kv
        TP 5670 is 56mm dia x 88mm long and weighs 962g.
        LMT 2250 is 44mm dia x 81mm long or 90mm with fan and weighs 560g.

        Also this LMT 2250/8 is a 1480kv wind and has a cost difference of around $300+.
        These are most typically used for high rpm SAW boats.


        Have fun with that....

        Comment

        • depeche_mode
          Senior Member
          • Jun 2012
          • 144

          #5
          Thanks @dethow and you have first dibs

          Comment

          • Leeandre
            Senior Member
            • Nov 2014
            • 274

            #6
            What I was actually asking if it it could replace the said motor running single to make the boat faster. Again please excuse my ignorance . Thanks. Is it as powerful I guess is what I am asking.

            Comment

            • dethow
              Wired Racing
              • Oct 2014
              • 1500

              #7
              Originally posted by Leeandre
              What I was actually asking if it it could replace the said motor running single to make the boat faster. Again please excuse my ignorance . Thanks. Is it as powerful I guess is what I am asking.
              Kind of a loaded question. Simple answer is no because a 950kv motor is going to have more torque then a 1480kv motor in regards which is more powerful.
              However, depending on size of the boat and battery setup this LMT motor COULD make it faster. This would possible require different batteries and different prop. To be honest there are so many variables in the question its hard to give a straight answer.
              I would assume if you are using a 5670 950kv motor you are probably dealing with a 40" plus sized boat running 10S to 12S batteries. This LMT motor is probably better suited for the 35" to 40" boat running 6S to 8S batteries. But that is not to say one couldn't run this on a larger boat so long as everything is setup properly for the motor.
              Have fun with that....

              Comment

              • dethow
                Wired Racing
                • Oct 2014
                • 1500

                #8
                Originally posted by depeche_mode
                Thanks @dethow and you have first dibs
                I need the motor and would be willing to buy both for $700 total.
                If your Canadian shipping on your 180a esc falls through I'd do $800 for all 3 items and you'd only have one shipment. LMK
                Have fun with that....

                Comment

                • Leeandre
                  Senior Member
                  • Nov 2014
                  • 274

                  #9
                  U are indeed right it is in a H&M agitator xl with a 300 amp esc running 12s .

                  Comment

                  • dethow
                    Wired Racing
                    • Oct 2014
                    • 1500

                    #10
                    Originally posted by Leeandre
                    U are indeed right it is in a H&M agitator xl with a 300 amp esc running 12s .
                    Yeah... that's a 1200mm or 47" Cat.
                    That's a big boat to consider using this as a single motor setup. However, these (together) would be perfect for a twin setup on that boat.
                    Have fun with that....

                    Comment

                    • Leeandre
                      Senior Member
                      • Nov 2014
                      • 274

                      #11
                      That's the boat alright , I got the idea for it because on H&M site I see them using the big single set up as well ,so I figured if they could do it . Not to mention I also have a 44 avenger with a big single that I have gps Ed at 73 so I figured a longer ,lighter hull with more wing has got to improve on that . Honestly speaking that avenger has been so solid ,I mean absolutely no issues.

                      Comment

                      • dethow
                        Wired Racing
                        • Oct 2014
                        • 1500

                        #12
                        @ 'depeche_mode', It's been 11 days since I made you an offer of $380 for one, or $700 for both, or $800 for both with the SeaKing 180 esc you have in another thread.

                        I know you haven't been on-line in awhile but you were on yesterday 10/12 with no response to the offers via this thread or PMs I sent to make sure you were seeing the offers.
                        Have fun with that....

                        Comment

                        • depeche_mode
                          Senior Member
                          • Jun 2012
                          • 144

                          #13
                          Sorry for delay. I am super busy with family. Please forgive the delay.

                          All PMs returned to date

                          Sorry Folks My Bad

                          Comment

                          Working...