Lehner 2240/8 Lk/high amp

[jkr]

Selling the motor with ~20 runs
Excellent condition with new bearings.
SOLD

[RaceMechaniX]

You need pics posted in order to sell or the admins will remove the thread.

[jkr]

Photos

https://www.dropbox.com/sh/6mb5atfuta5qno6/AAD4aNV_kF_2KBDMws1MxICba?dl=0

Thank you Tyler.

20150926_022436.jpg20150926_022601.jpg20150926_022624.jpg

[JimClark]

Post them in the thread or the thread will be deleted

[jkr]

Open to offers.

[fidelity101]

I had to look up the KV rating because I didn't know if that was standard based on the information you provided but here is the table in case it helps anyone else.

http://www.lehner-motoren.com/doc/rpm_all_en_11_2013.pdf

It looks like 1850 KV… Unless I read the chart wrong. :)

[jkr]

Yes the motor is 1850kv under load as the table shows and 94+% efficient.

[snaps]

Hi would you take 230 posted to australia cheers

[dmitry100]

Where are you guys getting 1850kv from?

Chart is clearly showing 1959kv: http://www.lehner-motoren.com/doc/rp...en_11_2013.pdf

[NativePaul]

I get 1850 too. It is a 2240/8, not a 1940/8 as I assume you looked up. Surprisingly small KV difference between the 2 motors though.

[Leeandre]

Guys help me out here ,I have a cheetah with a TP 4060 are these motors comparable in size meaning can I use the same motor mount ?

[gixx1k2]

Guys help me out here ,I have a cheetah with a TP 4060 are these motors comparable in size meaning can I use the same motor mount ?

The TP 4060 is 40mm in diameter the LMT 2240 is 44mm in diameter

[jkr]

Hi would you take 230 posted to australia cheers

Snaps 240usd posted.

[Leeandre]

Jkr I don't know IR you can help me ,I am very interested in your motor but I need a mount for it ,do you know where I can purchase one ,thanks .

[jkr]

I suppose you can make one If you can't find one.