Traxxas E-Revo 1/16 scale Brushless heavily upgraded

[JMSCARD]

ok so its not allumium upgraded heavily lol.. just the good parts for reliablity....

Here is a RTR (needs servo and batt if you don't want the optional lipo listed below) brushless Erevo 1/16 scale... never really ran much at all... probably 15 total runs...

has the following upgrades

RPM arms ALL around top, bottom, front and rear arms

Upgraded TRX allumium toe adjusters front and rear

Heatsink added to motor

Series Harness for two batts but that's only for nimh, but its included....it cant handle 4s lipo... it can 3s but honestly its way overkill, and this revo has never been on 3s lipo either... 2s is more then enough... the 2s is more powerful then the two nimh's in series.. and what most like to run on the mervs.

Upgraded racing truggy type wheels and tires in great shape with only a couple runs, a couple need some glue... new tube of AKA tire glue included.

Stock wheels/tires in good shape included as well as all the stock arms, and some extra parts...

Stock Traxxas 2.4ghz radio/rxr

Stock arms/extra parts/ baggy of small parts not shown in any pics also included...

What it needs:

Just a servo or servo gears for the stock servo shown.... and the servo is not strong enough... I hit my real cars tire in the parking lot and killed the stock servo... it really needs a hitec Mg servo or the stocker... the one in it I put in and never used with as its too week... it will come with stock servo arm for a traxxas servo also...

I will post pics of the body and radio when I get home...

$195 shipped in US east coast (east of Mississippi) $199 west side of Mississippi... add $14 to either if you want the Pulse Lipo shown ....

come RTR just add batts and a servo... this has all the good needed upgrades (rpm arms are a must)

[JMSCARD]

Saved for pics of body, extra parts, stock wheels/tires, and Radio...

these pics will be added when I get home...

[rw442]

Interested in Revo waiting to see body pics.Would a stock Traxxas 2075 servo do the job?

[JMSCARD]

Interested in Revo waiting to see body pics.Would a stock Traxxas 2075 servo do the job?

Give me 30 minutes took lots more pics, of all parts and he body etc... And I have the stock traxxas servo which is the smaller version of the 2075 it just needs new gears which are very cheap.. If you know how to change servo gears ....

[JMSCARD]

Pics updated, was on my phone before.. the merv takes a smaller servo mini size, so the 2075 wont work, any servo with 35oz of torque or more will work, but the servo included has a good motor, just stripped a couple teeth out, easy fix... here is the gears, order them and fix the stock servo is my recommendation it had plenty of guts...

http://www.ebay.com/itm/Traxxas-Servo-Gear-Set-2080-Micro-Waterproof-Servo-/231661843229?hash=item35f01f331d

But the while the body has no cracks, some scratches on top but its the original body and you can see the whole car hasn't been bashed... I liked doing little speed runs with it, if you give it lots of throttle even at 30mph it will wheelie lol, can hang them as long as you want... These really scoot, you can see a Pulse 2550mah 2s rx pack.. its the largest pack that fits in the battery area perfectly, and its still 20c rxr pack, and being the car pulls around 30a max on grass the battery works perfectly for long run time, and the merv is very fast with the 2s lipo, I'd say easily 40mph... its very smooth, and needs only shock oil and gears for the servo, I'll leave the servo I tried quick, it slid in but not enough grunt.

If you want the lipo add $14, Its rock hard and as new...2 months old, probably 3 total cycles in this and I use these same packs in my boats, planes, etc as receiver packs... pulse packs are excellent no question. You can use it in your boats too as a bonus lol, the batt has a trx and rxr plug as seen.

AKA tire glue in new in package, the front tires need glue as do on or two of the stockers... 2s on this 4000kv motor means its hauling the mail pretty good... the tires do expand a bit, the truggy type tires on it less so... just never glued right the first time, had to get better glue and never got around to it... I'll let whomever buys get their fingers sticky! haha.

[rw442]

Thanks for extra pics gonna have to hold off for now. Sweet truck for money!