FS Sticky Mickey's Auto masking

[JimClark]

I need some more of the Sticky Mickey's Auto masking but the rolls are huge so I would like to see if anyone wants to split the roll with me. i would like to Keephalf of the roll. The paper is 10" wide and the roll is 150 feet long. Is anyone interested in 1/4th or 1/2 of the roll?



Here is a link describing the product

http://www.eastwoodco.com/jump.jsp?itemID=14463&itemType=PRODUCT

I paid $38.76 locally for the whole roll

Jim

[longballlumber]

Jim,

I am possibly interested... How would you end up "splitting" the roll?

Thank
Mike

By the way, I am located in Michgan.

[Darin Jordan]

Jim,

I am possibly interested... How would you end up "splitting" the roll?

Thank
Mike

By the way, I am located in Michgan.

Something tells me there is a saw involved here...

[JimClark]

I have some plastic tubes from a large printer at work I guess I will just have to un roll from mine and roll it up into the other tube. I am not sure how much to ship it but I would do that at exactly what it cost.
Jim

[JimClark]

I guess I could cut it in half and have two 5" rolls I have a band saw so I could also so that

[lonewolf]

I dont need any but if i were buying I would want as wide as possible. The roll to roll wont be bad if you can get a straight start... To figure amounts either measure the thickness of material or weigh it and subtract the weight of the tube.... Really hard to measure material on a roll.

[JimClark]

I would probably pull off 10 feet at a time and roll it up
Jim

I dont need any but if i were buying I would want as wide as possible. The roll to roll wont be bad if you can get a straight start... To figure amounts either measure the thickness of material or weigh it and subtract the weight of the tube.... Really hard to measure material on a roll.

[jeff180]

I would take 1/4 of it if anyone wants the other 1/4

[JimClark]

If anyone other than Jeff wants the other 1/4 let me know. I am leaving town and will be back tuesday and we will work it out then

Thanks
Jim

[egneg]

I would like the other 1/4.

[longballlumber]

I guess that was my question... If your going to maintain the 10" width, I would be willing to take 1/2 from you. If you think that cutting it in half making it only 5" wide, I am going to pass.

Thanks
Mike

[JimClark]

On wednesday when I get back I will transfer 38 feet to a plastic roll I have and see what it weighs. If Jeff and Egneg back out then Mike you are next in line

1/4 of the roll is 10.00 plus shipping

See you wednesday
Jim

[longballlumber]

I would have thought that I could have gotten first consideration since I replied first... I simply wanted some additional information about how the roll was going to be "split"....

No worries, let the other have it. I can get my own.

[egneg]

I would have thought that I could have gotten first consideration since I replied first... I simply wanted some additional information about how the roll was going to be "split"....

No worries, let the other have it. I can get my own.

Yes you did show first interest and I will gladly bow out.

[JimClark]

Ok first off I have been selling on fourms long enough to have an awfull lot of tire kickers who ask questions then never follow through. I usually just sell to the first who at the very least give's me a serious commitment to buy or the first with the money. But since egneg has "bowed out" longballlumber if you want the other 38 feet it is yours. I will have them on rolls tomorrow and haeve a weight for shipping.

Jim