It's time to thin down some of the "projects" I've had waiting for me for too many years now.
This One is my Pro Boat Miss Geico V1 hull that I did the "race prep" thread on way back when these were first released. This one saw action at the 2012 Nats in both P-LTD CAT and P-LTD Offshore.
The strut is a skagged strut that has been modified to work well with this hull. Hardware includes flex cable and there is a Spektrum S6020 Digital Servo installed.
The hull is in GREAT shape, but there is crack on the right sponson on the bottom up towards the front that will need to be repaired. My blueprinting of the bottom make this one spot a little too thin and it cracked. Should be easy enough to fix. I would mix some epoxy with milled fiber and force that down into the crack. After it's setup, some filler and some sanding and you are back in business.
Otherwise, this hull is ready to bolt in your power system and go have some fun.
$95.00 Shipped in the USA makes it yours.
20150825_183425.jpg
20150825_183438.jpg
20150825_183506.jpg
20150825_183545.jpg
20150825_183605.jpg
This One is my Pro Boat Miss Geico V1 hull that I did the "race prep" thread on way back when these were first released. This one saw action at the 2012 Nats in both P-LTD CAT and P-LTD Offshore.
The strut is a skagged strut that has been modified to work well with this hull. Hardware includes flex cable and there is a Spektrum S6020 Digital Servo installed.
The hull is in GREAT shape, but there is crack on the right sponson on the bottom up towards the front that will need to be repaired. My blueprinting of the bottom make this one spot a little too thin and it cracked. Should be easy enough to fix. I would mix some epoxy with milled fiber and force that down into the crack. After it's setup, some filler and some sanding and you are back in business.
Otherwise, this hull is ready to bolt in your power system and go have some fun.
$95.00 Shipped in the USA makes it yours.
20150825_183425.jpg
20150825_183438.jpg
20150825_183506.jpg
20150825_183545.jpg
20150825_183605.jpg
Comment