Tweet
sold sold sold sold sold sold sold sold sold sold sold sold sold sold
I have my Kinetic Racing Mean Machine for sale…. This boat has very few runs, around 15…. And is in cherry shape…
I set this boat up like my last mean machine from Dana…. It’s a 5s ripper.
Boat has following equipment:
Aeromarine Mean Machine FE layup with FACTORY carbon reinforments, this is the new style hatch that makes taping down and absolute snap.
Carbon Fiber battery trays added
4074 Leopard 2200kv motor with water jacket and 5mm to .187 collet
.187 flex to 3/16 prop shaft
Traxxas digital waterproof servo with aluminum servo arm
Seaking 180V2 esc with cap bank… has Sealant on the esc to keep water out… really not needed lol in this hull as it’s a DRY hull… literally hard to find even drops of water in the hull after running…..
6.5mm bullets all around
I did install a larger rudder, as the kinetic version just didn’t have enough blade to it, I installed the kinetic rudder blade upside down…. When the boat flips, you can airboat it back in to you and actually steer it right to your destination… makes running without a recovery vessel so much nicer and It actually works like a champ… you can remove it with one bolt but I’ll leave it on as I think its great… vid is with it on and you can see it doesn’t affect normal running
I can include Two 5s 4400mah 65-130c nanotech lipos with 6.5mm connectors on them for $90 to make the boat totally rtr minus radio/rxr/prop… these packs were bought 3 weeks ago, and are VERY STRONG packs… I bought 10s split packs (totally separate packs, just pull of the shrink )… and split them up…wrapped electrical tape thoroughly around as I couldn’t source shrink wrap prior to using… I wouldn’t remove the tape it helps seal out water and works just dandy
Here is a vid of its last run…. I ran it a little wet this time… packs are a little farther forward then they usually are, but it shows how well it runs still…picks up a couple more mph with them farther back… just a little more on edge …. I'm standing on a waterfall lol... hence why you cant hear the boat well... its a screamer if you could hear it :)
The hull is in fantastic shape… two tiny 1mm chips in paint on back top… I showed pic of one… they are miniscule, and one drop of touch of paint and they’d be gone… just didn’t bother as it looks sweet as is!
You can see the black portion of the paint is a carbon fiber look pattern… pretty sweet!
$sold without lipos
The pics show the boat dirty from after last run... it will be cleaned and waxed prior to ship. The bottom portion of the hull has been lightly sanded for speed and handling... and was taped off before hand so its a clean job... runs GREAT>
I have my Kinetic Racing Mean Machine for sale…. This boat has very few runs, around 15…. And is in cherry shape…
I set this boat up like my last mean machine from Dana…. It’s a 5s ripper.
Boat has following equipment:
Aeromarine Mean Machine FE layup with FACTORY carbon reinforments, this is the new style hatch that makes taping down and absolute snap.
Carbon Fiber battery trays added
4074 Leopard 2200kv motor with water jacket and 5mm to .187 collet
.187 flex to 3/16 prop shaft
Traxxas digital waterproof servo with aluminum servo arm
Seaking 180V2 esc with cap bank… has Sealant on the esc to keep water out… really not needed lol in this hull as it’s a DRY hull… literally hard to find even drops of water in the hull after running…..
6.5mm bullets all around
I did install a larger rudder, as the kinetic version just didn’t have enough blade to it, I installed the kinetic rudder blade upside down…. When the boat flips, you can airboat it back in to you and actually steer it right to your destination… makes running without a recovery vessel so much nicer and It actually works like a champ… you can remove it with one bolt but I’ll leave it on as I think its great… vid is with it on and you can see it doesn’t affect normal running
I can include Two 5s 4400mah 65-130c nanotech lipos with 6.5mm connectors on them for $90 to make the boat totally rtr minus radio/rxr/prop… these packs were bought 3 weeks ago, and are VERY STRONG packs… I bought 10s split packs (totally separate packs, just pull of the shrink )… and split them up…wrapped electrical tape thoroughly around as I couldn’t source shrink wrap prior to using… I wouldn’t remove the tape it helps seal out water and works just dandy
Here is a vid of its last run…. I ran it a little wet this time… packs are a little farther forward then they usually are, but it shows how well it runs still…picks up a couple more mph with them farther back… just a little more on edge …. I'm standing on a waterfall lol... hence why you cant hear the boat well... its a screamer if you could hear it :)
The hull is in fantastic shape… two tiny 1mm chips in paint on back top… I showed pic of one… they are miniscule, and one drop of touch of paint and they’d be gone… just didn’t bother as it looks sweet as is!
You can see the black portion of the paint is a carbon fiber look pattern… pretty sweet!
$sold without lipos
The pics show the boat dirty from after last run... it will be cleaned and waxed prior to ship. The bottom portion of the hull has been lightly sanded for speed and handling... and was taped off before hand so its a clean job... runs GREAT>
Comment