ARTR Lizard Xtreme C-AFK

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • depeche_mode
    Senior Member
    • Jun 2012
    • 144

    #1

    ARTR Lizard Xtreme C-AFK

    SOLD

    ARTR Lizard Xtreme

    Material: C-AFK
    Color: Red
    Length: 830mm (32,66")
    Width: 240mm (9,44")

    Assembled are:

    Lizard C-AFK - 1717/N-C-AFK
    Fit out set carbon Lizard Xtreme -
    ESC Mount

    Analog -
    Flex shaft -
    Brass-PTFE hose -
    Silicon hose
    Water outlet
    Flex safety
    Rubber cuff

    MTC Rudder - Strut combination with integrated water inlet
    Linkage for servo incl. water sealed rubber cuff

    MBP collet 8mm or 5mm
    MBP lipo sled 45/240mm
    decal set

    Motor and prop not included

    $845.00

    no trades
    no part out
    New never been in the water
    Thank you
    Attached Files
    Last edited by depeche_mode; 07-21-2015, 11:20 PM. Reason: SOLD
  • Finest Racing
    In the Fast Lane
    • May 2013
    • 294

    #2
    Do you have pictures Inside the hull? Thanks
    What is different from your boat from the U.S. Extreme Lizard? I am comparing the notes from each site and I don't see and thing different. I am shopping for a boat for racing. I made a post a few days ago about how well this boat can handle rough water.
    Thanks
    Rob
    Last edited by Finest Racing; 07-20-2015, 07:03 PM.

    Comment

    • depeche_mode
      Senior Member
      • Jun 2012
      • 144

      #3
      20150720_160010.jpg20150720_160044.jpg

      Comment

      • depeche_mode
        Senior Member
        • Jun 2012
        • 144

        #4
        I really am a know nothing beginner boater... I did join NAMBA...but I am the wrong person to ask for data...LOL


        20150720_102736.jpg
        Attached Files

        Comment

        • Finest Racing
          In the Fast Lane
          • May 2013
          • 294

          #5
          Then I guess I should not ask you what the difference is between the MHZ USA version compared to the link you have on the thread. Here is the US link I have been reading to decide on which boat to buy http://mhzusa.com/Lizard-Xtreme-m-1717-N.htm
          What is included with the boat? I see you have a carbon fiber in lay.
          Thanks
          Rob

          Comment

          • depeche_mode
            Senior Member
            • Jun 2012
            • 144

            #6
            @finestracing the boat I have does not have an inlay it is one layer of the material you see, the manufacture calls it "C-AFK"

            Included are the boat, hardware , one MBP collet 8mm or 5mm,
            MBP lipo sled 45/240mm

            you can also have the original cheapy motor it came with SSS 2000kv please note I DID run this motor in another boat

            Comment

            • Finest Racing
              In the Fast Lane
              • May 2013
              • 294

              #7
              I am waiting for MHZ to contact me back. I am asked them what the difference was between the C-AFK and the US version from the US site. I read the description from both sites (Euro & US) and I don't see the difference. Once I hear from them, I will let you know where I stand. Thanks

              Comment

              • depeche_mode
                Senior Member
                • Jun 2012
                • 144

                #8
                Oh wait I do have some data this one cost more than the fiberglass boat . (I bought both) so this one is a better? Material?

                Comment

                • depeche_mode
                  Senior Member
                  • Jun 2012
                  • 144

                  #9
                  One more thing I bought it from Germany because users reported serious issues with USA dealer?... Some said they are not a dealer.. do your own research

                  Comment

                  • Finest Racing
                    In the Fast Lane
                    • May 2013
                    • 294

                    #10
                    Originally posted by depeche_mode
                    One more thing I bought it from Germany because users reported serious issues with USA dealer?... Some said they are not a dealer.. do your own research
                    I do believe that the quality in boats outside the US are better. I am trying to find out the difference between the two. The US dealer has not called me or wrote me back, not looking good for him. I am just protecting myself as the buyer - no offense. I don't want to over pay but I will pay for quality. Thanks If you search my history for Post's, you will see that I mentioned this boat with others as my top boats of choice that I researching to buy.

                    Comment

                    • tlandauer
                      Fast Electric Addict!
                      • Apr 2011
                      • 5666

                      #11
                      I built a Lizard Xtreme and I love the hull, it is a regular FG hull and I layered up FG cloth inside myself. The hull itself is top notch quality. It is too bad as the US dealer is defunct, they are no longer recognized by the German manufacturer. They do however have stocks on hand, but as said, if you order, you do it at your own risk. I experimented with them by placing a tiny order with tiny ECO props, they DID sent me the goods. But a hull is a different story, I don't like to worry about hundreds of dollars for a few days or weeks.....lol




                      oops, this is the F/S thread, sorry, moderators, delete if necessary.
                      Too many boats, not enough time...

                      Comment

                      • Finest Racing
                        In the Fast Lane
                        • May 2013
                        • 294

                        #12
                        Originally posted by tlandauer
                        I built a Lizard Xtreme and I love the hull, it is a regular FG hull and I layered up FG cloth inside myself. The hull itself is top notch quality. It is too bad as the US dealer is defunct, they are no longer recognized by the German manufacturer. They do however have stocks on hand, but as said, if you order, you do it at your own risk. I experimented with them by placing a tiny order with tiny ECO props, they DID sent me the goods. But a hull is a different story, I don't like to worry about hundreds of dollars for a few days or weeks.....lol




                        oops, this is the F/S thread, sorry, moderators, delete if necessary.
                        Thanks for you info. I think I will stay away from the U.S. Vendor from what you said.

                        Comment

                        • depeche_mode
                          Senior Member
                          • Jun 2012
                          • 144

                          #13
                          @tlandauer I think your local... when can we meet and I pick your brain LOL I am in LA.

                          I have two of these the FG one and the one i'm selling

                          Comment

                          • sofus
                            Member
                            • Nov 2011
                            • 88

                            #14
                            Hey
                            Look at the Pictures with the motor, you can see that it is a original German MHZ hull ( blue stamp ) in Carbon/Aramid
                            Lizzard is a fine boat run great

                            Brian

                            Comment

                            • Finest Racing
                              In the Fast Lane
                              • May 2013
                              • 294

                              #15
                              Originally posted by sofus
                              Hey
                              Look at the Pictures with the motor, you can see that it is a original German MHZ hull ( blue stamp ) in Carbon/Aramid
                              Lizzard is a fine boat run great

                              Brian
                              No doubt this is the real deal.

                              Comment

                              Working...