Tweet
This is a Delta Force MK II 40" mono that I built to run in our Open District races, as well as Q Mono and Offshore. It won Q Mono and Q Offshore @ the '14 NAMBA Nat's in Michigan, as it sits. I have also had a ton of success racing this boat against gas mono's in Open district racing.
This has been a bullet-proof setup.
Boat is sold complete RTR, less radio, and includes the following:
Neu 1527 1Y with cooler
Castle HV 240
Giant Power 6S 5000 mAh cells bought 6/14 and used @ the Nat's and 1 district race 10/14. Stored in fridge @ proper storage voltage
Cells are in perfect condition
8 mm connectors motor-ESC, and 5.5's cells-ESC
Castle BEC dipped in 270 Epoxy
5 volt mini fan
5" Schweers custom rail motor mount
Coupler, shaft, nut and 3 props (X450 for Offshore and X452 and X455 for Sprint)
Speedmaster Hardware with stainless steel turnfins
Hitec waterproof/digital servo
There is a paint blemish on the side deck, as well as a few prop nicks (filled w/epoxy) on the transom. I spot-painted the repair as I found a paint that was very close to the original gel color. It's blended smooth. The bottom has had a complete re-paint and has been re-tuned.
This is a set-it-and-forget-it boat. The only tuning difference between Sprint and Offshore is a change in prop and 1" back on the cell placement. That's it. All other trim adjustments are set as they were last summer and have never needed changing.
$1000 shipped Cont US. That is a firm price.
Any questions, please let me know.
This has been a bullet-proof setup.
Boat is sold complete RTR, less radio, and includes the following:
Neu 1527 1Y with cooler
Castle HV 240
Giant Power 6S 5000 mAh cells bought 6/14 and used @ the Nat's and 1 district race 10/14. Stored in fridge @ proper storage voltage
Cells are in perfect condition
8 mm connectors motor-ESC, and 5.5's cells-ESC
Castle BEC dipped in 270 Epoxy
5 volt mini fan
5" Schweers custom rail motor mount
Coupler, shaft, nut and 3 props (X450 for Offshore and X452 and X455 for Sprint)
Speedmaster Hardware with stainless steel turnfins
Hitec waterproof/digital servo
There is a paint blemish on the side deck, as well as a few prop nicks (filled w/epoxy) on the transom. I spot-painted the repair as I found a paint that was very close to the original gel color. It's blended smooth. The bottom has had a complete re-paint and has been re-tuned.
This is a set-it-and-forget-it boat. The only tuning difference between Sprint and Offshore is a change in prop and 1" back on the cell placement. That's it. All other trim adjustments are set as they were last summer and have never needed changing.
$1000 shipped Cont US. That is a firm price.
Any questions, please let me know.
Comment