Daya 550 - BNF

[Dangerous_Toys]

New build - Only hovered to ensure functionality.

All items are new except for GPS puck.

Any questions, just ask.

Need more pics, just ask.

Included in sale;
Daya 550 Frame
Tarot motor mounts
4x - Tarot 4006 620Kv Motors
4x - Afro 30a Esc's
Naza M Lite w/GPS
Range Video 13 x 5.5 CF Props
Spektrum AR8000 w/sat

$425 shipped lower 48

[Dangerous_Toys]

More pics....................

[JMSCARD]

Hey fellow rcg'r lol, What batt S count and MAH are recommended for this setup ?

[Dangerous_Toys]

Hey fellow rcg'r lol, What batt S count and MAH are recommended for this setup ?

Hey Jason, it is setup for 4s lipos. You can go anywhere from 5000mah to 10000mah. When I test hovered it I used a Multistar 4s 10000mah 10c lipo and she lifted it no problem. Of course the higher the mah rating the longer the flight time. If you would like I could do another hover with a 10000mah lipo and video it for you. Just let me know. If you have any other ??? feel free to ask.

[JMSCARD]

Only other question is what radio was it hooked to and do you have the file for it? I almost bought a Yuntec Typhoon q500 at the local Hobbyshop on Saturday.... I actually have hated the multis only because they are almost to easy to fly... but after flying a 350qx I see the fun in them, and want one to hook a camera too... I assume a gimbal could be added to this? I have a bunch of 6600, and 7200mah turnigy harcase 4s 60c packs lol... probably overkill on the C rating a bit, but I assume they would work on this? Also I assume my radio, and 4s lipos are all that's needed to fly?

I have a DX9B, a DX8, a DX18qq, and a DX6B so I'm hoping I'd already have the radio it was programmed to :) I would very much like to not have to do the programming bit, hence my desire for the RTF Yuntec or a DJI product...

As you know buying multis off rcg is a Crap shoot.... lots of junk there.... I know your stuff is nice, and real... lol, hence my interest!!

[Dangerous_Toys]

Only other question is what radio was it hooked to and do you have the file for it? I almost bought a Yuntec Typhoon q500 at the local Hobbyshop on Saturday.... I actually have hated the multis only because they are almost to easy to fly... but after flying a 350qx I see the fun in them, and want one to hook a camera too... I assume a gimbal could be added to this? I have a bunch of 6600, and 7200mah turnigy harcase 4s 60c packs lol... probably overkill on the C rating a bit, but I assume they would work on this? Also I assume my radio, and 4s lipos are all that's needed to fly?

I have a DX9B, a DX8, a DX18qq, and a DX6B so I'm hoping I'd already have the radio it was programmed to :) I would very much like to not have to do the programming bit, hence my desire for the RTF Yuntec or a DJI product...

As you know buying multis off rcg is a Crap shoot.... lots of junk there.... I know your stuff is nice, and real... lol, hence my interest!!

I set it up with a DX9 and I do have the file for it which I can send to your email. A gimbal can be hooked up to it no problem. The battery packs you have should work just fine. I also have the usb cable to hook up the naza to your computer to change any settings if you so desire. You will just need to download the Naza lite assistant on your computer.

[Dangerous_Toys]

This is still available Fellas.