Kingkong bundy of boat motors - TP100 & HK Trackstar 760kv

[Punisher 67]

PRICE REDUCED - $500.00 + SHIPPING ON TP100
OR BOTH MOTORS FOR $560.00 + SHIPPING

TP100 - 540kV

Kingkong bundy of boat motors - This is a huge motor

This motor includes a 12mm custom built coupler and motor mount . flex shaft hole is the standard 1/4 inch
This would be ideal for a 57 - 92 inch mono or any other boat in that size range .

more info - http://shop.rcboatbitz.com.au/index....oducts_id=1057


TP100 SPECS

KV - 540
Max amps - 480
Max volts - 48
Continuous watts - 12,000
Max watts - 23,000
Max RPM - 25,000
Current no load - 4.4
Diameter - 100mm
Length 103mm
Water cooled

This motor is brand new and sells for $700.00 - I am letting it go for $625.00 with custom mount and coupler. Buyer pays for shipping .





TRACKSTAR 760kV 1/5 MOTOR

Specs

Kv(rpm/v) 760
Weight (g) 1143
Max Current(A) 160
Resistance(mh) 11
Max Voltage(V) 30
Power(W) 4800
Shaft A (mm) 12
Length B (mm) 113
Diameter C (mm) 58
Can Length (mm) 107

This motor is also brand new and costs $114.00 from Hobbyking
these motors unfortunately come with 12mm shafts so I custom machined a 12mm coupler . flex shaft hole is the standard 1/4 inch . Very smooth motor well balanced - At full throttle unloaded they tend to vibrate a bit but with a slight load that disappears - they all do this apparently tons off torque . This motor would be the Castle 2028 equivalent at 1/3 the cost .

Looking to get $100.00 with custom coupler and buyer pays for shipping .

[jj2003]

Hi Peter,

This is John F. You provided me with some copper plates last year for my Lehner 3380's. They worked out GREAT!


On the TP100, Is this a custom mount you manufactured? I'm interested and would also like to know if you would be able to acquire another mount for this motor. The picture also shows the water jacket, is that also included? Thanks ahead, JJ

[Punisher 67]

Hello John

Yes I made the Mount and also had to custom machine the couplers. I could for sure whip up another. Just a note the water jacket leaks slightly at the rear but could easily be sealed with a bead of silicone. This is how I bought it new ( faulty O-ring) and yes water jacket is included.

To be a nice guy I would go $125.00 for the 4 piece mount and 12mm coupler if you wanted a second. considering the Mount itself takes over $20 in aluminum just for material not including the full day to machine and assemble it.

Peter

[jj2003]

Thank you very much Peter. I'm trying to get some funds together but if you sell it before I get them in hand, I understand. I would like to commit but I just don't have enough to do so right now. I have one of these now (TP100) and was looking for another for the Radtek as another motor option but blew my load on the MGM ESC's, so I'm saving my pennies again. Hopefully I can get back to you soon! Thanks again,JJ

[Punisher 67]

Hello John

Not a problem my friend - I don't think you have to many worries as most boaters on this forum don't run with that kind of budget on there projects . There are only a few that go balls to the wall here .

If you truly want this motor I will pull it off the market and hold it for you for 6 bills USD and throw in the mount and coupler for......FREE

If not please don't feel committed its been collecting dust on my bench for 12months along with a few others I just wanted to reclaim some bench space . Maybe I will make the grandkids an electric go-cart it definitely has the grunt .

[Punisher 67]

Price reduced