Brushless Deep Vee w/ hardware 2200KV 180amp ESC

[syncronized77]

Hey guys,

Here's my other baby...and yes those are REAL 25 aught 6 Remington cartridges (one was drilled out for the purpose of the exit point for the water cooling) on the rear of the hull which have been fashioned to look like exhaust pipes!!

Asking $250 + shipping. I have another custom modified boat thats in the 60s for still water and if you want that a well, I can sell both for $550 with all the props and extra ESCs and brushless motors, TX and RX and 1 set of lipos.

Its got a few spider cracks on the top of the hull but its never been crashed and I've repaired them so the hull is very sound. Its sat on my shelf for the past 2 years and has the following specs:

--2 x RARE Turnigy H3126 2200KV 1500 watts outrunner watercooling (1 installed w/ 20min run time, 1 brand new)
--180amp Turnigy Pro Brushless ESC with upgraded 5.5 bullet connectors setup for 4S lipo configuration
--extra brand new 60amp Turnigy Pro Brushless ESC
--high torque Traxxas waterproof servo
--hull has been water sealed and fibreglass layed for rigidity
--octura x642 polished, sharpened and balanced which will get you into the high 40s.

[macace123]

can you tell me what hull it is and a pic of the vee and bottom

[ray schrauwen]

I'd possibly be interested in the spare 2200kv motor or both please???

The hull is an Arowana hull and has a similar bottom to a pusuit.

[syncronized77]

I'd possibly be interested in the spare 2200kv motor or both please???

The hull is an Arowana hull and has a similar bottom to a pusuit.

What he said

If I generate interest on the hull and hardware...I can part out.

[syncronized77]

Looks like Valentines Day and the guy's wife got in the way of this sale and my other brushless rig LOL

So everything is still for sale now. Replying to emails in order that they received.

Also, please see the newly attached pics of stuff that's included if a package deal can be made...

Package will include

-Both brushless boat rigs with brushless motors, ESCs installed, waterproof RX so both Ready-to-Run

-Boat stands for transportation

-2.4 Traxxas TX

-4 rolls of clear hockey tape to secure the boat hatches

-Rear spoiler wing for Hydroplane with hardware for you to install if you'd like...I didn't like it installed because it always got in the way of taping down the hatch

-Grim Racer grease for main drive shafts

-A tonne of bullet connectors for your lipos to hook up the ESCs

-Brand new Turnigy 130A power analyzer

-Extra brand new water cooling motor mount for the Deep Vee Mono

-Extra silicone tubing for watercooling purposes

-Extra brand new Turnigy 3126 brushless outrunner 2200KV 1500 WATTS!! (the other is installed in the Deep Vee Mono) This motor is super RARE and the guys on OSE have already been messaging me to part it out!

-Extra brand new Turnigy 1800KV brushless outrunner

-Extra brand new watercooled 200A ESC

-Extra brand new watercooled 60A ESC

-All of my props....a lot of X642s and the M445 (all metal have been balanced and sharpened and a few polished) and a lot of warm up graupner props

-2 x 2S Turnigy 5000mah 30C lipos

Let me know if you have any questions.

[ray schrauwen]

I pass on motors. Need a drive shaft more. If the motors do sell seperate mbo is $20 each to florida.

[montymike]

Hmm am interested in props need separate prices

[syncronized77]

Sold the whole shibang to some lucky guy in IL...ENJOY!!