Brushless Aquaacraft Vegas Hydroplane MODIFIED boat 60 + mph

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • syncronized77
    Senior Member
    • Jun 2010
    • 277

    #1

    Brushless Aquaacraft Vegas Hydroplane MODIFIED boat 60 + mph

    Hey guys,

    Selling my baby...highly modified brushless conversion of the Aquacraft Miss Vegas RC boat. This was built and modeled after ProperChopper's build here on OSE and was GPS'd at 61.7MPH with my cell phone in a Ziploc bag...don't laugh!!

    $350 + shipping. I have another custom modified boat thats in the 50s for choppy water and if you want that as well, I can sell both for $550 with all the props and extra ESCs and brushless motors, TX and RX and 1 set of lipos

    It has never been crashed and has been a shelf queen for the past 2 years. And includes the following specs...

    --NEU 1515y 2200kv brushless motor with watercooling jacket ($230+) less than 15 min run time
    --Modified watercooled 200A ESC with upgraded 5.5 bullet connectors setup for 4S lipo configuration
    --high torque servo
    --hull has been water sealed and fibreglass layed for rigidity
    --rear wing with all hardware is included but I found it harder to tape up with the rear wing
    --extra BRAND NEW 200A ESC!!
    --extra BRAND NEW 1800KV Brushless Outrunner motor...will get you to just shy of 50 mph...good for practice runs
    --octura x642 prop polished, sharpened and balanced which will get you into the 50s...if you want me to swap in the M445 prop for over 60+mph just say so.

    NO TX and RX
    Attached Files
    Last edited by syncronized77; 02-16-2015, 10:05 PM.
    Go Brushless or GO HOME
  • AMP EATER
    Member
    • May 2014
    • 88

    #2
    How much shipped to 98036

    Comment

    • SJFE
      Fast Electric Addict!
      • Apr 2007
      • 4735

      #3
      So wait you have 2 of these?

      Comment

      • syncronized77
        Senior Member
        • Jun 2010
        • 277

        #4
        Originally posted by AMP EATER
        How much shipped to 98036
        You're 3rd in line right now....working on a package deal. Will get back to you if the other 2 in front fall through.

        Thanks for showing interest!
        Go Brushless or GO HOME

        Comment

        • syncronized77
          Senior Member
          • Jun 2010
          • 277

          #5
          Originally posted by SJFE
          So wait you have 2 of these?
          No...my other deep vee mono rig is listed here...

          http://forums.offshoreelectrics.com/...0KV-180amp-ESC

          Currently working on a package deal to sell all with a TX/RX/Lipos, but thanks for showing interest!
          Go Brushless or GO HOME

          Comment

          • Make-a-Wake
            FE Rules!
            • Nov 2009
            • 5557

            #6
            Looks like a Castle motor................??
            NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

            Comment

            • Doug Smock
              Moderator
              • Apr 2007
              • 5272

              #7
              Originally posted by syncronized77
              You're 3rd in line right now....working on a package deal. Will get back to you if the other 2 in front fall through.

              Thanks for showing interest!
              This is listed elsewhere in a package?

              Thanks
              MODEL BOAT RACER
              IMPBA President
              District 13 Director 2011- present
              IMPBA National Records Director 2009-2019
              IMPBA 19887L CD
              NAMBA 1169

              Comment

              • syncronized77
                Senior Member
                • Jun 2010
                • 277

                #8
                Originally posted by Make-a-Wake
                Looks like a Castle motor................??
                Doesn't Neu = Castle??
                Go Brushless or GO HOME

                Comment

                • syncronized77
                  Senior Member
                  • Jun 2010
                  • 277

                  #9
                  Originally posted by Doug Smock
                  This is listed elsewhere in a package?

                  Thanks
                  No....but someone is interested in scooping up both of my rigs with tx/rx/lipos/props, etc....in fact deal is pretty much done.

                  Pickup tomorrow afternoon...gawd I'm actually sad to see these babies go...seeing as I spent so much time on the forums here and had help from a lot of awesome people building up these rigs
                  Go Brushless or GO HOME

                  Comment

                  • Make-a-Wake
                    FE Rules!
                    • Nov 2009
                    • 5557

                    #10
                    Originally posted by syncronized77
                    Doesn't Neu = Castle??
                    No, but good luck with your local sale, looks like someone will get a nice boat............
                    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                    Comment

                    • syncronized77
                      Senior Member
                      • Jun 2010
                      • 277

                      #11
                      Looks like Valentines Day and the guy's wife got in the way of this sale and my other brushless rig LOL

                      So everything is still for sale now. Replying to emails in order that they received.

                      Also, please see the newly attached pics of stuff that's included if a package deal can be made...

                      Package will include

                      -Both brushless boat rigs with brushless motors, ESCs installed, waterproof RX so both Ready-to-Run

                      -Boat stands for transportation

                      -2.4 Traxxas TX

                      -4 rolls of clear hockey tape to secure the boat hatches

                      -Rear spoiler wing for Hydroplane with hardware for you to install if you'd like...I didn't like it installed because it always got in the way of taping down the hatch

                      -Grim Racer grease for main drive shafts

                      -A tonne of bullet connectors for your lipos to hook up the ESCs

                      -Brand new Turnigy 130A power analyzer

                      -Extra brand new water cooling motor mount for the Deep Vee Mono

                      -Extra silicone tubing for watercooling purposes

                      -Extra brand new Turnigy 3126 brushless outrunner 2200KV 1500 WATTS!! (the other is installed in the Deep Vee Mono) This motor is super RARE and the guys on OSE have already been messaging me to part it out!

                      -Extra brand new Turnigy 1800KV brushless outrunner

                      -Extra brand new watercooled 200A ESC

                      -Extra brand new watercooled 60A ESC

                      -All of my props....a lot of X642s and the M445 (all metal have been balanced and sharpened and a few polished) and a lot of warm up graupner props

                      -2 x 2S Turnigy 5000mah 30C lipos

                      Let me know if you have any questions.
                      Attached Files
                      Last edited by syncronized77; 02-15-2015, 10:21 AM.
                      Go Brushless or GO HOME

                      Comment

                      • Doug Smock
                        Moderator
                        • Apr 2007
                        • 5272

                        #12
                        Originally posted by syncronized77

                        So everything is still for sale now. Replying to emails in order that they received.

                        .
                        What does this mean?

                        http://forums.offshoreelectrics.com/...cs-Forum-Rules
                        MODEL BOAT RACER
                        IMPBA President
                        District 13 Director 2011- present
                        IMPBA National Records Director 2009-2019
                        IMPBA 19887L CD
                        NAMBA 1169

                        Comment

                        • syncronized77
                          Senior Member
                          • Jun 2010
                          • 277

                          #13
                          Sold the whole shibang to some lucky guy in IL...ENJOY!!
                          Go Brushless or GO HOME

                          Comment

                          • Doug Smock
                            Moderator
                            • Apr 2007
                            • 5272

                            #14
                            Originally posted by syncronized77

                            So everything is still for sale now. Replying to emails in order that they received.

                            .
                            Originally posted by Doug Smock
                            Did you think this was going to go away? Still waiting on a reply to the PM.
                            MODEL BOAT RACER
                            IMPBA President
                            District 13 Director 2011- present
                            IMPBA National Records Director 2009-2019
                            IMPBA 19887L CD
                            NAMBA 1169

                            Comment

                            • Diegoboy
                              Administrator
                              • Mar 2007
                              • 7244

                              #15
                              No PM deals. It's not hard to follow. Time is ticking....
                              "A quick temper will make a fool of you soon enough."
                              . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

                              Comment

                              Working...