New FG FC Daytona w/ twin hardware

[tiqueman]

Undrilled FC Daytona (more of the squared hatch corners not the round like on the Genesis) for sale with new center mount 115 rudder and 110 stingers. Also included are a set of my C/F motor mounts and a pair of FC cat head water outlets.

Price is $180.00 Shipped and insured to lower 48.

SOLD

Paypal only

Thanks
Scott

[tiqueman]

Also will include a new FC C/F servo plate mount

[darryl whitman]

would you sell just the hardware and motor mts?

[JMSCARD]

Boy I've got motors for this... Hmm do you have the flexes for extra $ Scott?

[tiqueman]

would you sell just the hardware and motor mts?

Id rather try it as a package at least for today. If it hasn't sold by tomorrow Ill do the hardware and mounts.

Boy I've got motors for this... Hmm do you have the flexes for extra $ Scott?

Hey Jason, good to see you around. I do not have flexes.

I do however have other hardware available including boot seals, push rods, cf servo horns etc etc.

[JMSCARD]

How much extra for the other tid bits Scott? I actually know of someone who might want this if I don't... I'll send him a text... I was trying to get him to build one of these, I would like it to but already have a single motor daytona, and have a couple bigger twin boats, and a big mono half done, I should probably focus!! But he very well will want it... Hold up! And good hearing from ya! Just like the good ol' days!

[fidelity101]

Thank you for the heads up Jason...I'm definitely interested!

This will be my first boat build so anything you can throw in to help the build process would be appreciated. Consider it sold at $180 and please throw in a few boot seals for me. I have carbon fiber rod, metal push rods, servo horns, etc. So I'll have to rely on Jason to see what else will be required before I start build. :) I'm also going with outrunners apparently so I'm thinking it might be a good idea to get some water cooled motor mounts???

[JMSCARD]

Thank you for the heads up Jason...I'm definitely interested!

This will be my first boat build so anything you can throw in to help the build process would be appreciated. Consider it sold at $180 and please throw in a few boot seals for me. I have carbon fiber rod, metal push rods, servo horns, etc. So I'll have to rely on Jason to see what else will be required before I start build. :) I'm also going with outrunners apparently so I'm thinking it might be a good idea to get some water cooled motor mounts???

Don't worry about the water cooled mounts Matt... You'll be running scorps and they can take the heat... No worries there... Just let the motors cool for 15 mins between runs... They aren't necessary with the high quality motors... And they won't be pushed hard in twin format.

[tiqueman]

An option I have done before is use the 90 degree mounts without the bottom plate and sandwich the cooling plate in between the mount and the motor but as Jason said, ive also run no cooling on quality outrunners without issue. The 90 degree mounts "as is" in my opinion are not a good mount to use by themselves.
($10.00 for the pair)

Ive got 1/4" stuffing tube for use without liner or 9/32 with liner, with c/f stuffing tube supports. Unfortunately Im out of the 1/4" tube supports, but the 9/32 would work as well.
($10.00 either option as part of the package deal)

If you plan to do a cf inlay I can provide a piece of cf to do so for $20.00.

And I will throw in two boots at no charge

[tiqueman]

And depending on your motor kv and what your intentions are I may have a set of cnc left and right props for your configuration as well that Id do for 30 for the pair.

[fidelity101]

I'm going 1900kv Scorpions on 5S...I might have to get new batteries as I'm not sure my 5S 6200mah would fit in this boat...or if they would be to heavy?

I'll take the cooling plates just to be on the safe side and the 9/32 with liner, with c/f stuffing tube supports as I like using teflon. I burned through all of my carbon fiber trying to fix a Joysway UH-1 boat so I could use carbon fiber cloth as well...I have plenty of Marine West Epoxy. Do you have the carbon fiber cloth that Keith Bradley uses? That diamond shaped material?

[tiqueman]

Not enough for an inlay sorry. Ive got the 2x2 twill

[fidelity101]

Thank you Scott. It looks like I owe you $200, so please send me a PM with your paypal information and I'll get you paid.

[tiqueman]

Yes 200 will take it.

[fidelity101]

Payment sent...thank you Scott!

Now I've got a Tunnel Hull to finish AND a twin catamaran to finish. :)