(9) Aero-model Pro Square 6000mah 90-180c lipos part #AM6000-2S90SQ

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JMSCARD
    Fast Electric Addict!
    • Mar 2010
    • 3444

    #1

    (9) Aero-model Pro Square 6000mah 90-180c lipos part #AM6000-2S90SQ

    I have (5) left of these new in box fresh from factory... $55 EACH shipped retail @$109 VERY powerful packs known to be lowest resistance cells out there.

    OR if you buy multiples.

    $105shipped for (2) in the US
    $200 shipped for (4) in the US


    Or take all 5 for $245 shipped!

    These are 2s 7.4v 90-180c packs with 5c charge rate 6000mah packs

    These are made to replace the high resistance from excess series wires by replacing two 1s saddle packs with (1) square pack in racing buggies/truggies/sct vehicles. The size is identical to the saddle packs sitting side by side, they give you the edge in racing where every volt counts! They also have 5mm bullets in the pack instead of 4mm like most saddles equaling lower resistance, each pack comes with the low profile billets to deans connector for balance charging and/or running to your esc... Each pack also contains two 5mm bullets for your esc so as you can plug direct from esc to battery.

    I have a hard time not believing these wouldn't work absolutely ballistic in the ready to run type boats and any 4 or even 6s setup.... Aero model only sold the highest end of gear and do a little surfing and you'll see these were known by racers to be the lowest resistance IR cells available... You can also see the 5mm female bullets on back as well as front so placement of terminals for ease of short connectors are as simple as flipping the pack over. I am keeping some these are some I can't possibly use all of as I bought 19 of them.image.jpgimage.jpgimage.jpgimage.jpgimage.jpg

    Paypal only shipped in the US 48
    Last edited by JMSCARD; 02-14-2015, 02:13 PM.
  • rayzerdesigns
    Fast Electric Addict!
    • Dec 2013
    • 1228

    #2
    the only bd thing is aero model went out of business as of January 3rd, as also they were the importer for hacker..they were selling these packs for $37, but if anyone is interested, they are equal to a saddle pack dimension wise, and like he says, the lowest internal resistance you find..

    Comment

    • JMSCARD
      Fast Electric Addict!
      • Mar 2010
      • 3444

      #3
      Originally posted by rayzerdesigns
      the only bd thing is aero model went out of business as of January 3rd, as also they were the importer for hacker..they were selling these packs for $37, but if anyone is interested, they are equal to a saddle pack dimension wise, and like he says, the lowest internal resistance you find..
      They sold out quick too, that was not including hazardous shipping either... just fyi... after shipping again, am not making anything here I just bought way to many of them, and now need to buy some bigger 6s packs... they are the fanciest packs of their kind, and to my knowledge the only ones that use 5mm bullets.... which made me jump on them... most saddles have 3.5 or 4's... I haven't tried any yet as its to cold but going to run them in my 4s genesis, impulse v2, and my DF33 I'm building... I think the 6000mah is great for my needs too... more runtime in my 4s sport boats and should work great... many pro's use these packs, not just for mod classes either, the stock 17.5 motor classes raved about them as they give that last bit of an edge voltage wise form the supreme quality cells combined with the low internal resistance. :) but yes Aero model is gone, stinks to as they serviced my Hacker motors here on all my planes... hacker plane motors are second to NONE period... German engineering is what it is :)

      I may keep these too if they don't sell soon, if they fit in the sponsons of my 114 mystic that's coming soon I will run them for 4s per motor for fun... and I will want as many packs on hand as possible

      Comment

      • ray schrauwen
        Fast Electric Addict!
        • Apr 2007
        • 9471

        #4
        I wonder if I can get away with 6000Mah for N2 Sport Hydro ? It's an ML 265, TP power 36mm x 70mm 4760KV motor. How to get them to Canada though... not good.... Drag man, they are nice...

        JUst ship it 1st class, lol... I don't know how others ship them for $30 to me from USA??? Fedex?
        Nortavlag Bulc

        Comment

        • JMSCARD
          Fast Electric Addict!
          • Mar 2010
          • 3444

          #5
          Originally posted by ray schrauwen
          I wonder if I can get away with 6000Mah for N2 Sport Hydro ? It's an ML 265, TP power 36mm x 70mm 4760KV motor. How to get them to Canada though... not good.... Drag man, they are nice...

          JUst ship it 1st class, lol... I don't know how others ship them for $30 to me from USA??? Fedex?
          Hey Ray, I'm not sure on the shipping but it is a bit scary shipping batts up over the border... sad part is I'm not far from it still... they are great packs, and I'm having second thoughts on selling any of them... :)

          Comment

          • rayzerdesigns
            Fast Electric Addict!
            • Dec 2013
            • 1228

            #6
            I use them in all my stock vehicles..well the shorty packs..i use the full size packs in my spec boats..they are over kill for mod buggies or trucks..i don't see why they wouldn't work in a n2 boat..6000 mah should be plenty for sprint race

            Comment

            • rayzerdesigns
              Fast Electric Addict!
              • Dec 2013
              • 1228

              #7
              on another note, their is something in the works with the supplier and and a new distributor, though I don't think it will be called aero model anymore, details soon

              Comment

              • ray schrauwen
                Fast Electric Addict!
                • Apr 2007
                • 9471

                #8
                Thank Ray. I'd like to try one pack, maybe two. Damn border... I could have them go to Florida and have my bro drive them up to me in the spring...

                Thinking....

                These are looking nice to me...
                Nortavlag Bulc

                Comment

                • JMSCARD
                  Fast Electric Addict!
                  • Mar 2010
                  • 3444

                  #9
                  Originally posted by ray schrauwen
                  Thank Ray. I'd like to try one pack, maybe two. Damn border... I could have them go to Florida and have my bro drive them up to me in the spring...

                  Thinking....

                  These are looking nice to me...
                  Let me know Ray :)
                  Last edited by JMSCARD; 01-18-2015, 02:01 PM.

                  Comment

                  • JMSCARD
                    Fast Electric Addict!
                    • Mar 2010
                    • 3444

                    #10
                    These are all back up for sale...

                    better deals for multiples...

                    Comment

                    • ray schrauwen
                      Fast Electric Addict!
                      • Apr 2007
                      • 9471

                      #11
                      Can you check the dimensions again for me. pics make them look square not, 69 x 93. Florida is a go but, my bro can't get them to me until late March'ish...
                      Voltage check too please, thanks...
                      Nortavlag Bulc

                      Comment

                      • JMSCARD
                        Fast Electric Addict!
                        • Mar 2010
                        • 3444

                        #12
                        Originally posted by ray schrauwen
                        Can you check the dimensions again for me. pics make them look square not, 69 x 93. Florida is a go but, my bro can't get them to me until late March'ish...
                        Voltage check too please, thanks...
                        Ray they're not square and are 67x93 I'll double check when I get home but I'm pretty positive of the dimensions, the packs are fresh as I got them just recently the last batch which these are... I checked all voltages a week ago and all were 3.85 on both cells in each and every pack... Pretty amazing consistency... Resistance on packs by reading forums after use yields the lowest I have ever seen... I think you will be very pleased :) but the packs are def not square they are longer in one dimension for sure... They call them square packs but aren't totally square... Made to replace 2 1s saddle packs with one 2s pack... Give me an hour and I'll update and confirm dimensions.
                        Last edited by JMSCARD; 01-18-2015, 07:15 PM.

                        Comment

                        • JMSCARD
                          Fast Electric Addict!
                          • Mar 2010
                          • 3444

                          #13
                          Originally posted by ray schrauwen
                          Can you check the dimensions again for me. pics make them look square not, 69 x 93. Florida is a go but, my bro can't get them to me until late March'ish...
                          Voltage check too please, thanks...
                          Ray they are def 67x93 image.jpgimage.jpg

                          Comment

                          • ray schrauwen
                            Fast Electric Addict!
                            • Apr 2007
                            • 9471

                            #14
                            PM sent, hate this android tablet....
                            Nortavlag Bulc

                            Comment

                            • ray schrauwen
                              Fast Electric Addict!
                              • Apr 2007
                              • 9471

                              #15
                              Do you think the cells are side by side inside or on top of each other??
                              Nortavlag Bulc

                              Comment

                              Working...