Tim, I like to be in line for a 2-3/4'' cable, WHAT I NEED IS A REVERSED ROTATION CABLE, BUT I NEED THEM MATCHING LENGTH WISE, SO PENDING THE RESULT, I AM INTERESTED IN YOUR REV. CABLE.
Let me ask a question then. For a smaller boat like the GP310, does it matter if it's a 2-3/4 stub versus 2-3/8 stub? I could free up one for tlandauer then.
Tim,
Do you mean overall length? because the normal and RR are the same except for the cable wind direction. both are 18" long.
Tim
I meant the stub shaft length, I need to cut the cable anyway.
Let me ask you, do they make 2-3/8'' shaft? I don't really have to have 2-3/4'', JUST WANT THEM TO MATCH.
Thanks!
Tim
Yes, its a 30" hydro from ML Boatworks. It'll be a round bottom 3/8" Speedmaster. I don't have it yet so can't measure it. From the pic on the OSE store it looks to be 2-1/8"
Again, the reason I was asking so Tim could have one of the 2-3/4 stubbs I said I would buy.
If the shorter stubb works, I'd take 2 of the 2-3/4 and 3 of the 2-3/8. That leaves left and right 2-3/4 for Tim.
Yes, its a 30" hydro from ML Boatworks. It'll be a round bottom 3/8" Speedmaster. I don't have it yet so can't measure it. From the pic on the OSE store it looks to be 2-1/8"
Again, the reason I was asking so Tim could have one of the 2-3/4 stubbs I said I would buy.
If the shorter stubb works, I'd take 2 of the 2-3/4 and 3 of the 2-3/8. That leaves left and right 2-3/4 for Tim.
Rick, that is utterly kind of you, I appreciate your thought and gesture, but don't worry , if you need it take it.
Happy Holidays!
Tim
Tim,
I do not have a 2-3/8" reverse rotation at this time.
You could however get the 2-3/4" and die it down to 2-3/8" and cut off the excess thread.
Let me Know
Tim
Originally posted by tlandauer
I meant the stub shaft length, I need to cut the cable anyway.
Let me ask you, do they make 2-3/8'' shaft? I don't really have to have 2-3/4'', JUST WANT THEM TO MATCH.
Thanks!
Tim
Rick,
I will have 3 for you if you want those.
The problem with shipping International is it will be First Class Intl without Ins and I will ship to you if your willing to take the chance.
Priority i think would be way to expensive for this purchase but can quote that as well.
Let Me know
Thanks
Tim
Originally posted by rickwess
Yes, its a 30" hydro from ML Boatworks. It'll be a round bottom 3/8" Speedmaster. I don't have it yet so can't measure it. From the pic on the OSE store it looks to be 2-1/8"
Again, the reason I was asking so Tim could have one of the 2-3/4 stubbs I said I would buy.
If the shorter stubb works, I'd take 2 of the 2-3/4 and 3 of the 2-3/8. That leaves left and right 2-3/4 for Tim.
Tim,
I do not have a 2-3/8" reverse rotation at this time.
You could however get the 2-3/4" and tap it down to 2-3/8" and cut off the excess thread.
Let me Know.
Tim
Thanks, will see..... sorry, I need to leave now , get back later.
Rick, that is utterly kind of you, I appreciate your thought and gesture, but don't worry , if you need it take it.
Happy Holidays!
Tim
Need? No. I only need the one and the 2nd can be a spare. As for the 3rd, I'm just hording Hughey flex cables.
Other Tim. I'll take two or three of the 2-3/4" stubs........depending on what Tim takes or does not take. Either way all three of those are sold. I'm in no hurry so can wait until he gets back from wherever he went.
Yes shipping to Canada sucks. I've learned to accept it. Please quote both and I'll decide.
As long as I am not depriving you having the CORRECT cables, and if it's REALLY OK, then i will take the RR with the matching stub shaft.
I am at a birthday party, will take a few hours before I can pay.
Thank you very much.
Comment