Tweet
Lehner Motors & Schulze Controller for sale
Cost of shipping is included in prices listed below (Continental USA only)
Lehner motors:
1 Used - Lehner 1940/4 (3919kv) LK-HiAmp, 5mm……………….. Sold
1 Used - Lehner 2250/5 (2367kv) LK-HiAmp, 5mm……………….. Sold
1 New - Lehner 2250/7 (1691kv) LK-HiAmp, 8mm…………….….. Sold
1 Used - Lehner 2260/6 (1644kv) LK-HiAmp, 8mm……………….. Sold
Note; all the used Lehner motors are in excellent condition with less than 5-10 minutes running time. All motors are 3 wire Delta wind Lk-HiAmp versions (with internal cooling fan). All motors have 6.5mm connectors installed.
Note; the new 2250/7 motor was installed in a hull but never run in the water (bench tested only – brand new never used).
All the above motors include Lehner Cooling Jackets and factory plastic containers.
Schulze fut-xl-32.202 WK water cooled controller:
1 New – 32.202 controller ……………….………………………….. Sold
As most people know Schulze controllers are no longer being manufactured due to business closure.
As such, this is a rare opportunity to purchase a new unused Schulze 32.202 controller.
Specifications; (3 - 10) Lipo cells (10-32 Ni cells), 200/260A, Opto-coupler, splash water protection, water cooling and data logging.
I have soldered three 4 inch (8AWG) long lead wires into the controller boards 6.0mm female connectors. The lead wires have 6.5mm bullet connectors attached. It also has 8.0mm bullet connectors attached to the battery lead wires (with a spark arrester on the negative lead wire).
This was one of my spare controllers that was never used. It has been bench tested to verify its functioning correctly.
It uses six dip switches for foolproof program setting (functions are set to either on or off).
Factory box and user manual is included.
Cost of shipping is included in prices listed below (Continental USA only)
Lehner motors:
1 Used - Lehner 1940/4 (3919kv) LK-HiAmp, 5mm……………….. Sold
1 Used - Lehner 2250/5 (2367kv) LK-HiAmp, 5mm……………….. Sold
1 New - Lehner 2250/7 (1691kv) LK-HiAmp, 8mm…………….….. Sold
1 Used - Lehner 2260/6 (1644kv) LK-HiAmp, 8mm……………….. Sold
Note; all the used Lehner motors are in excellent condition with less than 5-10 minutes running time. All motors are 3 wire Delta wind Lk-HiAmp versions (with internal cooling fan). All motors have 6.5mm connectors installed.
Note; the new 2250/7 motor was installed in a hull but never run in the water (bench tested only – brand new never used).
All the above motors include Lehner Cooling Jackets and factory plastic containers.
Schulze fut-xl-32.202 WK water cooled controller:
1 New – 32.202 controller ……………….………………………….. Sold
As most people know Schulze controllers are no longer being manufactured due to business closure.
As such, this is a rare opportunity to purchase a new unused Schulze 32.202 controller.
Specifications; (3 - 10) Lipo cells (10-32 Ni cells), 200/260A, Opto-coupler, splash water protection, water cooling and data logging.
I have soldered three 4 inch (8AWG) long lead wires into the controller boards 6.0mm female connectors. The lead wires have 6.5mm bullet connectors attached. It also has 8.0mm bullet connectors attached to the battery lead wires (with a spark arrester on the negative lead wire).
This was one of my spare controllers that was never used. It has been bench tested to verify its functioning correctly.
It uses six dip switches for foolproof program setting (functions are set to either on or off).
Factory box and user manual is included.
Comment