Carbon Fiber Fightercat 37” Shocker

[PowerDemon]

This is a mint carbon fiber FC Shocker. It is powered by a Fightercat 101 that has been taken apart, epoxy coated and the cooling block resealed properly. It is paired with a Neu 1530 1Y. It is spinning a Prather 245 (done by Chris at dasboata). The boat is built by kfxguy and the build thread can be found here http://forums.offshoreelectrics.com/...ild&highlight= the build quality of this boat is excellent. The hull is the SAW layup and has been additionally reinforced by kfxguy. The transom has been reinforced epoxy has been poured in the tips of the sponsons and in the sponson floors. The battery trays are custom made so is the ESC plate, RX mount, and servo mount. The boat comes with an extra Octura X450 prop, (done by kfxguy) PVC stand, and a pair of SPC 4S 5000mah 50c lipos. I will also include a 1S SPC 5000mah 50c lipo but one of the tabs needs to be soldered back on. It will also come with a Spektrum RX, and Hyperion LiFe 850mah RX pack. The servo is a Futaba S3003. This boat is awesome and I don’t want to let it go but I need the funds for my next project. If you have an questions or want more photos please feel free to comment and ask. I am asking $1200 shipped to the lower 48. This boat is well worth it. If you feel that this price is unreasonable please make an offer.

[PowerDemon]

Price drop $1150 shipped

[PowerDemon]

Price drop $1100 shipped. This is a great deal for a great rtr boat.

[Leeandre]

How does the neu motors compare to the tp ,like is it comparable to the tp 4970 ? Oh and what kind of top speed on 6s and how does it perform as a sport boat ,good all rounder ?

[Leeandre]

How does this compare to an h&m freya ,just sold one I had for 3 weeks.

[PowerDemon]

The Neu 1530 is going to be far superior to the 4070. It is made with better components and has a higher max rpm. The 1530 is also longer. With the correct prop it could preform well on 6S. But 8S is the best cruising setup with this boat. I do not know what kind of speed you could get on 6S. I have never run it on that voltage. If you want it to go slower you can just prop down. It comes with the batteries to run 8S. I am unfamiliar with the h&m freya so I cannot answer this question.

[PowerDemon]

How does the neu motors compare to the tp ,like is it comparable to the tp 4970 ? Oh and what kind of top speed on 6s and how does it perform as a sport boat ,good all rounder ?

Are you interested in this boat?

[tjdabomb]

That is a beautiful boat. Unfortunately, it is out of my price range. Unless you want to trade for a 36" silver fox and a MG 24. :p

[PowerDemon]

It sure is.. Make an offer.

[Leeandre]

Can't lie I am ,just got a cheetah ,have not even run it yet ,oh and that's to accompany my 44 avenger pro ,my 48 aeromarine v ,my 56 central marine fountain ,all of which I got in the last three months since I got into the hobby so my wife is a Little cranky as you can understand however ,I love the build ,my latest cheetah is a great CF build by rockstar so really excited about that

[PowerDemon]

Ok cool. That is quite a fleet! Well let me know if anything changes.

[tjdabomb]

Power, I am kinda in the same situation as lee, I have four boats, two of which aren't complete that I haven't worked on in months. I'd love to
Own a cf hull, 26, 37, 41 .... Whatever. Just my current fleet and its state of being just can't allow me to offer a price commiserate with my situation that, I think, wouldn't be an insulting offer.

[PowerDemon]

Ok I understand. Let me know if something changes.

[PowerDemon]

Price drop $1050 shipped..

[Leeandre]

Good luck power but do t give it away ,if the timing was a little different .