Tweet
I have for sale a good condition Revolt 30 in Blue. Comes with original stand and manual.
It's all stock except for a few upgrades noted below.
The Good:
- Kintec Racing Flexshaft, Teflon Liner and Bullet Nut
- Your choice of Grimracer 42x55 Stock Prop or Octura X642 Prop (Sharpened and Balanced)
- Castle Creations 5.5mm Bullets on ESC to Motor and ESC to Lipos (haven't changed them yet, but will at no additional cost).
- Traxxas 2075 High-Torque Waterproof Servo
- Newer Style Aquacraft Rudder with Correct Sized Water Pick-Up (Sharpened and Beveled)
- Newer Style Aquacraft Brass Strut Bushing with Correct Grease Holes (Sanded and Polished to float correctly in the strut)
The Bad:
- Hairline stress crack on the hull just in front the of the motor mount. About 2 inches long, It literally looks like a strand of hair is stuck on the hull. It hasn't actually cracked thru the hull, but you can catch it with your fingernail.
This is a known weakpoint in the Revolt, easy fix. Just reinforce the motor mount / tub area with fiberglass or carbon fiber cloth and resin to prevent the motor mount from flexing on the hull.
- Small nick on the nose, I fixed it some resin and touch up paint.
- No receiver or transmitter.
- Some minor scuffs and scrapes, but still looks excellent, just not brand spanking new.
The only reason I'm selling this boat is because I am getting ready to add a 40" Catamaran, and one boat must go. I don't have room or time for more than 4 boats, I already have one Revolt that has been modified to a Leopard/180a 5S, and don't need two of them.
$180 or best offer, not including shipping cost.
NOTE: I will get more detailed images up soon, including those of any defects. The picture showing the inside of the hull show the old Futaba servo, the blue 2075 has been installed now.
It's all stock except for a few upgrades noted below.
The Good:
- Kintec Racing Flexshaft, Teflon Liner and Bullet Nut
- Your choice of Grimracer 42x55 Stock Prop or Octura X642 Prop (Sharpened and Balanced)
- Castle Creations 5.5mm Bullets on ESC to Motor and ESC to Lipos (haven't changed them yet, but will at no additional cost).
- Traxxas 2075 High-Torque Waterproof Servo
- Newer Style Aquacraft Rudder with Correct Sized Water Pick-Up (Sharpened and Beveled)
- Newer Style Aquacraft Brass Strut Bushing with Correct Grease Holes (Sanded and Polished to float correctly in the strut)
The Bad:
- Hairline stress crack on the hull just in front the of the motor mount. About 2 inches long, It literally looks like a strand of hair is stuck on the hull. It hasn't actually cracked thru the hull, but you can catch it with your fingernail.
This is a known weakpoint in the Revolt, easy fix. Just reinforce the motor mount / tub area with fiberglass or carbon fiber cloth and resin to prevent the motor mount from flexing on the hull.
- Small nick on the nose, I fixed it some resin and touch up paint.
- No receiver or transmitter.
- Some minor scuffs and scrapes, but still looks excellent, just not brand spanking new.
The only reason I'm selling this boat is because I am getting ready to add a 40" Catamaran, and one boat must go. I don't have room or time for more than 4 boats, I already have one Revolt that has been modified to a Leopard/180a 5S, and don't need two of them.
$180 or best offer, not including shipping cost.
NOTE: I will get more detailed images up soon, including those of any defects. The picture showing the inside of the hull show the old Futaba servo, the blue 2075 has been installed now.
Comment