I want the hull hardware dinogys ESC servo I font need anything else I race p spec price it to ship to 98294 sultan Wa
RTR OSE Pursuit Mono Race Boat FS
Collapse
X
-
Its not the boat its the driver
http://namba2016fenats.com/
Whiplash,Sprint Cat, Pursuit, 83' Miss Rock modern hydro JAE21, Dragon M11 Tunnel, Mickey Beez Jet, CF JAE21 -
Even if you part it out you will make more that way I don't need anything else.Its not the boat its the driver
http://namba2016fenats.com/
Whiplash,Sprint Cat, Pursuit, 83' Miss Rock modern hydro JAE21, Dragon M11 Tunnel, Mickey Beez Jet, CF JAE21Comment
-
Ok... So you don't want the engine? Everything is mounted... So you want the engine and mounts removed... I will leave the esc and servo mounted...
Macace - so shipped for the boat/hull/hardware/esc/servo as mounted minus engine and mounts... Will say $400 plus $180 for dinogys total $580 plus $30 to ship it all to 98294 via USPS ground. Send $610 plus address info - I accept PayPal ([email protected]) or via cash app (if you have it)
If you want the engine and mounts add $100.
Skyhigh - M445 $33 shipped for the prop to 97124. PayPal or cash app . Send address.
I will package and ship upon receipt of payment. Thanks...Comment
-
-
-
-
TTT: Still Available:
OSE Pursuit Mono Boat Hull and Hardware with ESC extra caps and Servo mounted - OSE Leopard 4082 2200 kv motor with upgraded aluminum Leo water jacket mounted with water cooled motor mount plus upgraded collet- hatch tape, $500 (figure $30 to ship) (really don't want to yank the engine out; However $400 without engine/mounts/jacket if someone wants it removed) - Then OSE Leopard 4082 motor with water jacket/mounts would be $100 if someone wants all that separate.
Drop in flex cable for pursuit $30
Octura M445 prop balanced/sharp $30 SOLD
Spinner Nut - SOLD
Dinogy 65c 6000 mah 4s race packs - $90 each $180 both
Turnigy 50C 5000 mah 4s packs $45 each $90 both
Futaba 3pl 2.4 g controller/receiver and traxxas water proof receiver box - $100
3 Extra servos plus parts -$50
Carbon fiber kit - motor mounts- battery tray and 18 inch fiber sheet - $65
I charger 206b plus external power supply and octo cable from buddy rc to charge multiple packs $150 SOLD
Misc box of 5.5mm bullets, splitters to run 4s2p, battery straps, infrared heat reader, esc program card, coolant lines, bullet caps, orings, washers, Teflon tube, grease... Lots! - $75Comment
-
Price Drops on Items
TTT: Still Available - Prices Dropped...
OSE Pursuit Mono Boat Hull and Hardware with ESC extra caps and Servo mounted - OSE Leopard 4082 2200 kv motor with upgraded aluminum Leo water jacket mounted with water cooled motor mount plus upgraded collet- hatch tape, $375 (figure $30 to ship) (really don't want to yank the engine out; However $300 without engine/mounts/jacket if someone wants it removed) - Then OSE Leopard 4082 motor with water jacket/mounts would be $75 if someone wants all that separate.
Drop in flex cable for pursuit $25
Octura M445 prop balanced/sharp $30 SOLD
Spinner Nut - SOLD
Dinogy 65c 6000 mah 4s race packs - $80 each $160 both
Turnigy 50C 5000 mah 4s packs $40 each $80 both
Futaba 3pl 2.4 g controller/receiver and traxxas water proof receiver box - $75
3 Extra servos plus parts -$30
Carbon fiber kit - motor mounts- battery tray and 18 inch fiber sheet - $40
I charger 206b plus external power supply and octo cable from buddy rc to charge multiple packs $150 SOLD
Misc box of 5.5mm bullets, splitters to run 4s2p, battery straps, infrared heat reader, esc program card, coolant lines, bullet caps, orings, washers, Teflon tube, grease... Lots! - $50 or discounted to $40 if purposed with another item...Comment
-
TTT - bump now that I see Easter stuff out at the stores that means spring is just right around the corner right? Anyways... still left and prices are OBO and will deal for the whole package... say $665 for everything left shipping included if you buy the package...
OSE Pursuit Mono Boat Hull and Hardware with ESC extra caps and Servo mounted - OSE Leopard 4082 2200 kv motor with upgraded aluminum Leo water jacket mounted with water cooled motor mount plus upgraded collet- hatch tape, $375 (figure $30 to ship) (really don't want to yank the engine out; However $300 without engine/mounts/jacket if someone wants it removed) - Then OSE Leopard 4082 motor with water jacket/mounts would be $75 if someone wants all that separate.
Drop in flex cable for pursuit $25
Dinogy 65c 6000 mah 4s race packs (about 5 runs total on the packs) - $80 each $150 both
Turnigy 50C 5000 mah 4s packs (15 runs total) $40 each $75 both
Futaba 3pl 2.4 g controller/receiver and traxxas water proof receiver box - $75
3 Extra servos plus parts (servos are $25 each new) -$30
Carbon fiber kit - motor mounts- battery tray and 18 inch fiber sheet - $40 (brand new kit; was going to redo the mounts/inside)
Misc box of 5.5mm bullets, splitters to run 4s2p, battery straps, infrared heat reader, esc program card, coolant lines, bullet caps, orings, washers, Teflon tube, grease... Lots! - $50 or discounted to $40 if purchased with another item...Comment
Comment