Tweet
Here we go, this isn’t your average Pursuit! It may look like it on the outside, BUT it’s what’s on inside that counts (at least that’s what my Mom used to say)… 
This is the hull and hardware you would get if you were to buy from HK. However, I was very dis-pleased with the internal set up from HK.
The boat was bought and used at the NAMBA Nationals for less than 10 runs.
• First of all the boat was completely stripped and I did a carbon fiber inlay
• I then designed and built a stringer system to hold a Jim Williams Motor Mount. I will need to double check if it’s 4” or 5” rails
• The stuffing tube was reinstalled flooded type system using a carbon fiber tube
• The HK strut was modified (removed lead bushing system) so that I could use the more traditional .187( w/.187 stub) flex shaft using a brass floating bushing system
• Receiver, servo mount, and ESC mount were redesigned into the stringer system. As well as the steering push rod. A VERY solid set up with little to no slop
• Boat includes a Hughey .187 Flex shaft with 5mm collet.
In my opinion, this boat is in better structural and mechanical condition than buying directly from HK. Pictures tell it all….
Price is $200 and the buyer pays for the ride
Thanks
Mike
This is the hull and hardware you would get if you were to buy from HK. However, I was very dis-pleased with the internal set up from HK.
The boat was bought and used at the NAMBA Nationals for less than 10 runs.
• First of all the boat was completely stripped and I did a carbon fiber inlay
• I then designed and built a stringer system to hold a Jim Williams Motor Mount. I will need to double check if it’s 4” or 5” rails
• The stuffing tube was reinstalled flooded type system using a carbon fiber tube
• The HK strut was modified (removed lead bushing system) so that I could use the more traditional .187( w/.187 stub) flex shaft using a brass floating bushing system
• Receiver, servo mount, and ESC mount were redesigned into the stringer system. As well as the steering push rod. A VERY solid set up with little to no slop
• Boat includes a Hughey .187 Flex shaft with 5mm collet.
In my opinion, this boat is in better structural and mechanical condition than buying directly from HK. Pictures tell it all….
Price is $200 and the buyer pays for the ride
Thanks
Mike
Nortavlag Bulc 
Comment