Tweet
I finally made the switch to Futaba, I know many have great results from Spektrum, and I still use it for my cars, but something at my pond just doesn't jive with Spektrum.
DX3S w/(1) MR200- $100 shipped------SOLD------
DX3C w/(1) MR200- $90 shipped
Futaba 3PK w/FASST 2.4g module- $60 shipped-----SOLD--------
I have a total of (6) MR200 receivers, but none will be sold individually until the radios are sold first, and people who buy the radios (other than the Pro Boat) will have first priority on the extra receivers. They are all used, and have been bound and tested this morning, but they range from great shape, to used for a few seasons, and will be sold in that order as well. A couple had liquid electric tape on them, I peeled it off one just so I could see the LED, left it on the other because the LED still showed through, you can easily peel it off if wanted. I did this a couple years ago when I was convinced that water was causing me problems, it had nothing to do with that though. A couple have a broken tab on the case, no big deal they still snap together fine, and the coated one was milled out underneath where the pins are to allow clearance for the liquid electric tape, and because I was ruling out water pooling under the pins and causing problems.
DX3S is in great shape, bought it in a package deal a couple years ago and used it once when I had problems with another radio. It does have 125 hrs on the screen though, so I have a feeling it was on during storage til batts died, maybe even twice..... The only thing wrong with it is that one of the rivets that held the batt spring contacts had let go, and if you weren't careful when you removed the batts it would go shooting off into space, this morning I drove a short screw in to resolve that, and if I didn't point this out you probably never would have noticed, but I have a thing for honesty.
This radio will include (1) MR200 receiver for $110 shipped
DX3C I bought new and has been used for a couple seasons, is scratched up a bit, but works like new. This radio will include (1) MR200 for $100 shipped.
Also have a ProBoat radio, barely used, collecting dust, will come with (1)MR200 for $50 shipped.------SOLD-------
The remaining (3) MR200's will be an additional $27 each to anybody who buys a radio, $25 for the last one with the hole in the case. If there are any left they will be $30 shipped.
Next is a Futaba 3PK, with a FASST 2.4g module installed. Has a drop-down wheel setup. I got this in a package deal recently, but I drive a right hand radio with opposite hands, and the drop down doesn't work for me. I powered it up and it works fine. Seems like a real nice radio for an older model, but feel free to do some research. FWIW The module alone goes for $75 on Ebay. Radio comes with NO receivers for $70 shipped SOLD******
All shipping is within the 48 states. Not looking for "offers" at this time, items will also be posted on another forum. Thanks for looking.
DX3S-SAM_0469.jpgSAM_0466.jpgSAM_0467.jpgSAM_0468.jpgSAM_0473.jpg
DX3S w/(1) MR200- $100 shipped------SOLD------
DX3C w/(1) MR200- $90 shipped
Futaba 3PK w/FASST 2.4g module- $60 shipped-----SOLD--------
I have a total of (6) MR200 receivers, but none will be sold individually until the radios are sold first, and people who buy the radios (other than the Pro Boat) will have first priority on the extra receivers. They are all used, and have been bound and tested this morning, but they range from great shape, to used for a few seasons, and will be sold in that order as well. A couple had liquid electric tape on them, I peeled it off one just so I could see the LED, left it on the other because the LED still showed through, you can easily peel it off if wanted. I did this a couple years ago when I was convinced that water was causing me problems, it had nothing to do with that though. A couple have a broken tab on the case, no big deal they still snap together fine, and the coated one was milled out underneath where the pins are to allow clearance for the liquid electric tape, and because I was ruling out water pooling under the pins and causing problems.
DX3S is in great shape, bought it in a package deal a couple years ago and used it once when I had problems with another radio. It does have 125 hrs on the screen though, so I have a feeling it was on during storage til batts died, maybe even twice..... The only thing wrong with it is that one of the rivets that held the batt spring contacts had let go, and if you weren't careful when you removed the batts it would go shooting off into space, this morning I drove a short screw in to resolve that, and if I didn't point this out you probably never would have noticed, but I have a thing for honesty.
This radio will include (1) MR200 receiver for $110 shipped
DX3C I bought new and has been used for a couple seasons, is scratched up a bit, but works like new. This radio will include (1) MR200 for $100 shipped.
Also have a ProBoat radio, barely used, collecting dust, will come with (1)MR200 for $50 shipped.------SOLD-------
The remaining (3) MR200's will be an additional $27 each to anybody who buys a radio, $25 for the last one with the hole in the case. If there are any left they will be $30 shipped.
Next is a Futaba 3PK, with a FASST 2.4g module installed. Has a drop-down wheel setup. I got this in a package deal recently, but I drive a right hand radio with opposite hands, and the drop down doesn't work for me. I powered it up and it works fine. Seems like a real nice radio for an older model, but feel free to do some research. FWIW The module alone goes for $75 on Ebay. Radio comes with NO receivers for $70 shipped SOLD******
All shipping is within the 48 states. Not looking for "offers" at this time, items will also be posted on another forum. Thanks for looking.
DX3S-SAM_0469.jpgSAM_0466.jpgSAM_0467.jpgSAM_0468.jpgSAM_0473.jpg
Comment