Getting Out of the Hobby Sale

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mitchesx
    Senior Member
    • Nov 2013
    • 236

    #1

    Getting Out of the Hobby Sale

    After a dismal season this past summer, with me only getting out 3 times, I have decided to get out of RC boating. I will be listing everything in the coming Days/Weeks/Months, this is just a start. I will continue to post to this thread so the moderators do not have to combine them. Shipped prices (most will be shipped) will be in the lower 48 only. All forum rules will apply - No PMs, all correspondence on the forum only. See the forum rules for all the details. Each item will be in a different post so that they are easier to read. I'd like to stay with Paypal wherever possible, so I will PM paypal information once an item has been sold. First I will take it gets it, per forum rules, and with priority as per forum rules (two I will take its, first has dibs, 2nd is 2nd in line). Shipping will be as soon as possible, any delays will be communicated by PM, or in a post on the forum. I will ship all items insured, with tracking where possible. Things get busy, but I will try to ship within a couple days.

    Here Goes....

    Updated with Adjusted Prices on new, never run, and slightly used boats, with new additions
    Last edited by mitchesx; 11-03-2014, 09:25 PM.
    Steve Mitchell
  • mitchesx
    Senior Member
    • Nov 2013
    • 236

    #2
    SoldAEROMARINE JERSEY SPEED SKIFF Updated to the correct motor and ESC specs

    Set up by the incomparable Propper Chopper himself aka RCBoatbuild, Tony Heller - this boat has never seen water! Never run. It has only been powered to set the ESC and throttle. It has a Leo 3674, Seaking 120 V3 Speed Control, program card, all Speedmaster and OSE hardware, and an OSE Prop. Painted drivers, etc. This setup was done to run 4s2p 5000 in parallel. Bullets are 5.5. You will need your Rx/Tx and batteries. I had intended to do a Phila Flyers theme, (I know - booooo), but it also lends itself perfectly to a Harley Davidson theme as well. $535\shipped Lower 48 Thanks to Tony for helping me get the specs right! Xmas Special!!! $450 shipped in the lower 48!!
    Attached Files
    Last edited by mitchesx; 10-09-2015, 03:30 PM.
    Steve Mitchell

    Comment

    • mitchesx
      Senior Member
      • Nov 2013
      • 236

      #3
      REVOLT 30

      As stated - Stock Revolt 30 with an OSE upgraded shaft, and a Dasboata 440 prop. The original prop and shaft come with it as well. This is a RTR package and will be shipped in its original packaging, and will include Tactic Radio system. I ran this boat twice, with a single 4S 5000 battery. There is no damage, never been wrecked, nothing. $260 ShippedSold USA4ME

      Youtube:
      Attached Files
      Last edited by mitchesx; 11-10-2014, 10:16 PM.
      Steve Mitchell

      Comment

      • mitchesx
        Senior Member
        • Nov 2013
        • 236

        #4
        FE CONVERTED VS 1

        Just as I bought on here last year - tried to run one time, but it wound up upside down. It has been Corrosion X'd and I waited three days before I powered it up again to make sure all was OK. It will come exactly as it did to me. VS1 hull, Aquacraft 2030, and Aquacraft 60 Amp ESC, OS lower with adaptor, 30C 4S 5000 mah pack, two spare shafts, and Tactic receiver. I could not get receiver to bind. ARTR $275\Shipped VS1 sold to Brandon Galles
        Attached Files
        Last edited by mitchesx; 10-28-2014, 09:03 AM.
        Steve Mitchell

        Comment

        • mitchesx
          Senior Member
          • Nov 2013
          • 236

          #5
          JAE 21 FE ARTR

          Again Just as I bought last season - I never actually got to run it. I set the ESC on my RX, and soldered on 5.5 bullets and that was that. Other than that change it is exactly as I received it. It has an Aquacraft 2030, and a 60 Amp ESC. I believe the first owner only ran it once or twice. It has Zippkits hardware, and a Zippkit prop, although I had a spare that is from when I ran Nitro. It is balanced, sharpened, thinned, and modded, I believe. That will be included. There is a spare Hughey shaft, and the ABS cowl as well. $315\shippedSold to KACORDY
          Attached Files
          Last edited by mitchesx; 10-28-2014, 09:02 AM.
          Steve Mitchell

          Comment

          • darryl whitman
            Senior Member
            • Sep 2012
            • 535

            #6
            I too am interested in your GP 400

            Comment

            • gizmo1
              Senior Member
              • Dec 2010
              • 254

              #7
              Possibly interested in your Mean Machine if it goes on the block .. Would like details .. Thanks
              JAE21 Rigger, ML Boatworks PS 295 Tunnel , TS3 FE Tunnel , H & M No Step 3 Mono , H & M Skater , Wildcat EP , Rio EP .

              Comment

              • oscarel
                Fast Electric Addict!
                • Dec 2009
                • 2129

                #8
                I'm interested in the JAE, who built it?

                Comment

                • mitchesx
                  Senior Member
                  • Nov 2013
                  • 236

                  #9
                  Originally posted by oscarel
                  I'm interested in the JAE, who built it?
                  Original Thread from when I bought it.

                  http://forums.offshoreelectrics.com/...!!JAE21-Rigger!!!
                  Steve Mitchell

                  Comment

                  • mitchesx
                    Senior Member
                    • Nov 2013
                    • 236

                    #10
                    Originally posted by gizmo1
                    Possibly interested in your Mean Machine if it goes on the block .. Would like details .. Thanks
                    I have a local buyer for it, but if they do not come through or back out, it will be up here. Should know in a couple weeks.
                    Steve Mitchell

                    Comment

                    • kacordy
                      Senior Member
                      • Oct 2012
                      • 410

                      #11
                      Steve, I will take the JAE. Please send me a PM.

                      Thanks, Allen Cordy

                      Comment

                      • oscarel
                        Fast Electric Addict!
                        • Dec 2009
                        • 2129

                        #12
                        Crap, next in line for JAE if deal falls through.

                        Comment

                        • mitchesx
                          Senior Member
                          • Nov 2013
                          • 236

                          #13
                          Originally posted by kacordy
                          Steve, I will take the JAE. Please send me a PM.

                          Thanks, Allen Cordy
                          Allen, PM Sent. JAE Sold Pending Funds. Oscarel is 2nd in line.
                          Steve Mitchell

                          Comment

                          • Brandon Galles
                            Member
                            • Oct 2014
                            • 36

                            #14
                            Ill take the VS1
                            -Brandon
                            TFL Zonda Leopard 4082 1600kv, ML Boatworks PX335 FE Castle-Neu 1515 2200kv
                            VS1 FE Castle-Neu 1515 2200kv, CRC 70" Outerlimits Zenoah 30.5cc

                            Comment

                            • mitchesx
                              Senior Member
                              • Nov 2013
                              • 236

                              #15
                              Originally posted by Brandon Galles
                              Ill take the VS1
                              -Brandon
                              Brandon - PM inbound with Paypal info. VS1 Sold Pending Funds
                              Steve Mitchell

                              Comment

                              Working...