Scale Nissan 350z body with LED's

[Make-a-Wake]

Scale hard body, very nice. LED system installed with small servo-type wire attatchment for 6-12v. Made of hard, but semi-flexible plastic..

Length: 19"
Wheelbase from center to center of wheelwell: 10.75"
Width: 8"

Lower 48 US, $29 + $4 shipping

[tomstoys2]

Do you know off hand if this will fit an Associated TC4? I can measure tonight when I get home. If so I would be interested in it. Looks like it will be close.
Thanks,
Tom

[Make-a-Wake]

Hi Tom, I just looked up the specs on the TC4 and it should fit it well.

Specs:
Length: 14.7" (373mm)
Width: 7.5" (190mm)
Weight: 48.5oz (1375g)
Wheelbase: 10.2" (259mm)


I measured the Nissan wheelbase in mm and came up with 270, TC4 is 259, each wheel will only be off of center by 5mm, barely noticable, about 1/4". The body width at 8" will just cover each side by 1/4", and the length, which when re-measured just now, at 18.5" should give you 4" fore and aft from the wheelwell centers(wheelbase). the Lexan body length for the Associated's is 17.1-17.5. Should look good, and if you are running 2s-3s you can hook the lights up.

[tomstoys2]

perfect, I'll take it.
pm your paypal please
Tom

[tomstoys2]

Who makes the body?
Tom