WTT::::PB MG29 hull and Hardware

[tunnelvision0323]

Wanting to see if anyone would be interested in trading my MG29 hull and hardware for a Stiletto hull and hardware or a hydro hull and hardware
I would trade RTR for RTR if there is interest for that (stock electronics)

Thanks
Daniel
miss g 3.jpgmiss g 2.jpgmiss g 1.jpg

[Vin-m]

i have a hydro i may want to trade .post some pics of the inside and motor and esc please

[tunnelvision0323]

mg interior.jpg

[tomstoys2]

Any interest in a Pro Boat Miss Bud hydro converted to FE?
Tom

[msundsd5]

@ Tomstoys2 ....... can you send me some pics of the Miss Bud? Outside and inside of hull....... I may in be interested in that........

[tunnelvision0323]

Tomstoys2 I would defiantly be interested could you please post some pics of it? I love a miss bud

[tomstoys2]

I'll get some up tonight when I get home from work. It's a shaft drive conversion. I have planned on converting to flex drive at some point. Some mods and reinforcement done by the previous owner in Seattle area. I have a Proboat 45a ESC in it on a Feigo 540L 12 2048kv. I've added weight in the nose to get the COG right. I have only run it a few times. Tom

[tomstoys2]

There are 2 2s 5000ma batteries tucked on each side. I used Velcro to keep them in. Not real easy to remove but they will come out. They are in storage mode but not sure how much life they have. I'll include them. Also have the bag like new except a small rip in the corner. I would like to keep the stand. Two cowels. On signed by Dave but it's rubbing of.

[tomstoys2]

It's not perfect. A few touch ups.

[tomstoys2]

a few more

[tomstoys2]

@ Tomstoys2 ....... can you send me some pics of the Miss Bud? Outside and inside of hull....... I may in be interested in that........

If I don't work something out with Tunnelvision

[tunnelvision0323]

does it come with a prop?

[tunnelvision0323]

also how does it run with out strut adjustment

[tomstoys2]

Last time I ran it I had a x442 and it ran great, unfortunetly, the prop nut came off and I lost it. I can include a plastic prop for you to try. Sorry I don't have any videos. It seems to run fine with out the strut adjustment but If you plan on racing it, I would convert it to flex shaft. This is the part I was going to order for the conversion:
http://www.offshoreelectrics.com/pro...=ros-spdss-001
and a 3/16" flex cable.
I would also suggest getting a better turn fin if you want to race.

Tom

also how does it run with out strut adjustment

[tunnelvision0323]

no racing for me.... no clubs around here just me, a boat and a pond!!