Tweet
SOLD
I have a Quanum Relentless run about 20 times. It comes with an upgraded 120a Aquastar ESC that been fully sealed with liquid tape for extra waterproofing. All water tubing has been replaced with better thicker tubing. Has red cnc red antenna mount.
Flex cable and parts that came with it are brand new along with new nylon prop.
Also included is 3 lipos.
Issues:
Bottom right side of boat has about a thin straight crack about an inch long. I tried putting silicone and super glue with no effect. I couldn't reach the inside part due to location and ended up using waterproof duct tape that was effective at keeping water out. Also back inside corner of boat has small nick that been sucessfully siliconed. See pictures. Inside of boat has also been repainted glossy black due to original cheap 50a esc burning up. Original location of esc was burned and covered over with servo tape which has worked good for 120a esc.
Included:
*1 - Quanum Relenless (I paid $185 shipped to USA)
*1 - 2650mah 4s Zippy 45C lipo (I paid $31)
*2 - 3000mah 3s Zippy 20C lipo's (I paid $36)
*1 - Aquastar 120a Waterproof ESC (I paid $78)
*1 - Stainless steel 2pc collet (I paid $14)
*1 - BL2815 Brushless Outrunner 1900kv motor (Came with boat)
*1 - High torque standard size Servo (Came with boat)
*Tubing and cnc antenna mount (I paid $13)
*New flex cable with its parts and prop ($19)
YOU NEED RADIO AND RECEIVER ONLY
I've invested about $376 for the boat. Gonna take a big loss. Reason I'm selling is because at my local lake there is always high wind and rough waters which makes running the boat at full throttle impossible without constantly flipping it, especially on 4s. I have two other boats that have the self right feature that run no problem there which is what I'll be looking for next.
I want to sell the boat as a whole and not as parts if I can get a buyer.
$155 SHIPPED
USA SHIP ONLY
PAYPAL ONLY
I have a Quanum Relentless run about 20 times. It comes with an upgraded 120a Aquastar ESC that been fully sealed with liquid tape for extra waterproofing. All water tubing has been replaced with better thicker tubing. Has red cnc red antenna mount.
Flex cable and parts that came with it are brand new along with new nylon prop.
Also included is 3 lipos.
Issues:
Bottom right side of boat has about a thin straight crack about an inch long. I tried putting silicone and super glue with no effect. I couldn't reach the inside part due to location and ended up using waterproof duct tape that was effective at keeping water out. Also back inside corner of boat has small nick that been sucessfully siliconed. See pictures. Inside of boat has also been repainted glossy black due to original cheap 50a esc burning up. Original location of esc was burned and covered over with servo tape which has worked good for 120a esc.
Included:
*1 - Quanum Relenless (I paid $185 shipped to USA)
*1 - 2650mah 4s Zippy 45C lipo (I paid $31)
*2 - 3000mah 3s Zippy 20C lipo's (I paid $36)
*1 - Aquastar 120a Waterproof ESC (I paid $78)
*1 - Stainless steel 2pc collet (I paid $14)
*1 - BL2815 Brushless Outrunner 1900kv motor (Came with boat)
*1 - High torque standard size Servo (Came with boat)
*Tubing and cnc antenna mount (I paid $13)
*New flex cable with its parts and prop ($19)
YOU NEED RADIO AND RECEIVER ONLY
I've invested about $376 for the boat. Gonna take a big loss. Reason I'm selling is because at my local lake there is always high wind and rough waters which makes running the boat at full throttle impossible without constantly flipping it, especially on 4s. I have two other boats that have the self right feature that run no problem there which is what I'll be looking for next.
I want to sell the boat as a whole and not as parts if I can get a buyer.
$155 SHIPPED
USA SHIP ONLY
PAYPAL ONLY
Comment