RTR ProBoat Impulse 31

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lt130th
    Senior Member
    • Apr 2014
    • 858

    #1

    RTR ProBoat Impulse 31

    This is a brand new V2 hull, canopy and canopy seal which has been completed with all of the hardware and electronics from a V1 Impulse 31. The V1 donor Impulse had approximately eight, 4s runs on it. Everything was simply transfered from the old hull to this brand new hull. The only change I've made is replacing the flimsy metal rudder control rod with a 2mm carbon fiber rod. The metal rod will be included. This is a RTR boat with TX/RX and a sharpened/balanced prop and upgraded bullets between motor & ESC. Since it has not touched the water it will likely need a little adjustment in the setup. Otherwise it's ready to run - just add batteries. $320 shipped to the lower 48 states.

    0001.jpg001.jpg002.jpg003.jpg004.jpg

    Thanks,
    Michael P.

    Since I haven't sold many items on OSE, my ebay ID is LT1_30TH if anyone wants to check me out.
    Last edited by lt130th; 10-19-2014, 10:28 PM.
  • lt130th
    Senior Member
    • Apr 2014
    • 858

    #2
    005.jpg006.jpg007.jpg008.jpg009.jpg

    Comment

    • lt130th
      Senior Member
      • Apr 2014
      • 858

      #3
      010.jpg011.jpg012.jpg013.jpg014.jpg

      Comment

      • lt130th
        Senior Member
        • Apr 2014
        • 858

        #4
        015.jpg016.jpg018.jpg020.jpg021.jpg

        Comment

        • lt130th
          Senior Member
          • Apr 2014
          • 858

          #5
          022.jpg023.jpg024.jpg025.jpg

          Comment

          • lt130th
            Senior Member
            • Apr 2014
            • 858

            #6
            026.jpg027.jpg028.jpg

            Comment

            • robinator63
              Senior Member
              • Aug 2008
              • 204

              #7
              If you ever decided to split this up, I would be interested in hull and hardware.
              Thanks.

              Comment

              • lt130th
                Senior Member
                • Apr 2014
                • 858

                #8
                I'm going to keep this one complete, but the V1 hull is getting a face-lift, and will be sold minus hardware, once finished. When you buy a new Impulse hull like the one above, it comes with nothing (no canopy/canopy seal/hardware). It does come with the stuffing tube mounted. So to get a complete hull, add $25 for the canopy, and $6 for the canopy seal to the $143 hull price for an actual cost of $175. Then hardware is $100 for fins, tabs, strut & rudder. That's insane. If you find an Impulse 31 hull, complete with hardware, it's like gold.

                Michael P.
                Last edited by lt130th; 09-24-2014, 10:29 AM. Reason: grammar

                Comment

                • lt130th
                  Senior Member
                  • Apr 2014
                  • 858

                  #9
                  Ttt

                  Comment

                  • lt130th
                    Senior Member
                    • Apr 2014
                    • 858

                    #10
                    Listed this on ebay & someone from Indonesia hit "buy it now" without looking to see that the shipping was within US, only. Now I have a claim open with ebay to cancel the purchase. I did offer the seller international shipping with the actual shipping cost rather than the flat rate specified, but he declined.

                    ...so, still for sale.

                    Comment

                    • lt130th
                      Senior Member
                      • Apr 2014
                      • 858

                      #11
                      Ok, ebay cancelled the bogus buyer's transaction so the auction/buy-it-now is back on. Ending Saturday... FYI. I think I saw at least one member here bidding before the auction got hosed.

                      Comment

                      • lt130th
                        Senior Member
                        • Apr 2014
                        • 858

                        #12
                        Having to list for too much on ebay to cover fees. Still for sale here & on RCGroups.com...though it seems all that people are buying on RCGroups.com is sailboats. I may put it up for sale in my local hobby shop. They take 10%, which is still less than what ebay takes, & also no PayPal fees...

                        Comment

                        • USA4ME
                          Member
                          • Oct 2014
                          • 32

                          #13
                          I want it, what's the deal on both boats?

                          Comment

                          • lt130th
                            Senior Member
                            • Apr 2014
                            • 858

                            #14
                            I just received an email from offshoreelectrics about your post...24 hours after you made it, LOL. Better late than never I guess. The V1 hull that all of the electronics and hardware came from is under construction. It had some cracks in the hull that I'll be repairing and will be refinishing the exterior while modding the interior, but I have not had time to get to it yet. I think I have 98% of the parts for that rebuild, but won't be able to start on it for another couple weeks at the earliest. Let me know if you want the one in this listing. I'll PM you my Paypal address and go get it from my local hobby shop. I left it with them a couple weeks ago to sell in their shop so I'll need to run by and pick it up and get it all packaged back up to ship.

                            Thanks,
                            Michael P.

                            Comment

                            • USA4ME
                              Member
                              • Oct 2014
                              • 32

                              #15
                              Hi Michael, it hasn't been 24hrs sense I replied to the post yet. I just can't justify taking a $154.00 hit to up grade the servo, esc, and motor to bring it up to date. I'm gonna have to pass. If robinnator63 passes on a hull and hardware deal if you do decide to part it out, put me next in line.

                              Comment

                              Working...