200 amp controller with 4160 hybrid

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Doozie870
    Senior Member
    • Apr 2007
    • 828

    #1

    200 amp controller with 4160 hybrid

    Up for sale is a 200 amp pistol compatable (at least with a spectrum on 6volts) esc, and a hybrid outrunner/inrunner motor 4160 1600kv. bench tested one time without load. shrink has been opened just to take a look inside, also red wire going to reciever has been cut. not sure if this was needed but didnt want to smoke anything using a reciever pack.
    some specs.
    This is a new type of motor, with an outrunner system built inside an inrunner case. Giving the performance and torque of an outrunner with the no moving external parts ease of use of an inrunner.
    Spec.
    Length: 60mm
    Diameter: 41mm
    Shaft: 5mm
    Weight: 229g
    Kv: 1600rpm/V
    Power: 1250W+
    Resistance: 62ohm
    ESC Required: 60A or higher.

    $100.00 shipped for both


    100_4893.jpg

    100_4897.jpg

    100_4896.jpg

    100_4894.jpg

    100_4895.jpg
  • crazzy maxx
    Senior Member
    • Dec 2007
    • 498

    #2
    how much for just the esc
    snort pixi sticks=symptoms-:

    Comment

    • Doozie870
      Senior Member
      • Apr 2007
      • 828

      #3
      How about $65 without the motor ends, as they are a odd ball size.

      Comment

      • crazzy maxx
        Senior Member
        • Dec 2007
        • 498

        #4
        im getting payed end of the week but if anyone else wants it give it to them
        snort pixi sticks=symptoms-:

        Comment

        • H2OCamel
          FAST ELECTRIC EVERYTHING
          • Oct 2007
          • 484

          #5
          Doozie if crazy maxx wants the hole thing I don't need it :)
          "Discussion is an exchange of knowledge; an argument, an exchange of ignorance." Robert Quillen

          Comment

          • crazzy maxx
            Senior Member
            • Dec 2007
            • 498

            #6
            all i want is the esc. you can have the rest
            snort pixi sticks=symptoms-:

            Comment

            • RCprince
              Fast Electric Addict!
              • Jul 2007
              • 1637

              #7
              Where are you guys finding these motors
              Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"

              Comment

              • RCprince
                Fast Electric Addict!
                • Jul 2007
                • 1637

                #8
                Doozie I'm been on that site for months, I just look, but have never seen that motor. I'm impatient I like to have my stuff with in a few days
                Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"

                Comment

                • toyotatruckin
                  Senior Member
                  • Aug 2007
                  • 110

                  #9
                  look under the outrunner tab

                  example

                  Comment

                  • Doozie870
                    Senior Member
                    • Apr 2007
                    • 828

                    #10
                    motor sold.
                    Esc still available, you will need solder connector ends on motor side.
                    $55.00 shipped.

                    Comment

                    • lonewolf
                      Senior Member
                      • Jul 2007
                      • 658

                      #11
                      pm sent on esc
                      Twin cat 9xl,... 29 titan 8xl,....37 in mono kb48 8xl.... 42 in twin elc cat project... 42 in gasser cat 260 modded zenoh''' planes and trucks....

                      Comment

                      Working...