AquaCraft Motley Crew RxR

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hobby_man
    Senior Member
    • Sep 2011
    • 103

    #1

    AquaCraft Motley Crew RxR

    Up for sale is my used Motley Crew RC boat, motor and stand AQUB7111
    with a Brand New stock AquaCraft motor Water-cooled 6-pole 1800kV and a
    Dynamite 80 amp esc DYNM3820
    AquaCraft AQUB7777 FRP 2-Blade Boat Prop
    New hatch AQUB6233 NIB and one used, one for show and one for go

    This boat will run on 4S or 6S lipo setup series or parallel. With 1 6S lipo using the jumper pictured/included this boat will go 49 mph on GPS
    AND it will do this for 4 minutes continuous with a Gens ace LIPO Battery 5000mAh 60-120C 22.2V
    All day long and not blow up or burn down.
    I have oversized water lines in this set up.
    Progressive RC 6MM bullets on ESC

    I am not selling a transmitter or a receiver ( RX is under the paper towel in the photo)

    The bottom of the boat has been scuffed with a scotch bright pad and the Hull has some cracks in the gel coat (picture). One is on the port side rear and one on the port side mid deck. The boat does not leak!
    The GO hatch has a bubble in it from sitting in the sun, The SHOW hatch has never been used in the lake.

    This boat is fast and it runs great, you add your radio RX & TX and lipo battery and off to the lake you go.

    $300 Shipped to lower 48

    IMG_5462.JPGIMG_5461.JPGIMG_5460.JPGIMG_5459.JPGIMG_5457.JPG
    Last edited by hobby_man; 09-07-2014, 08:06 PM.
  • hobby_man
    Senior Member
    • Sep 2011
    • 103

    #2
    IMG_5456 - Copy.JPGIMG_5455 - Copy.JPGIMG_5454 - Copy.JPGIMG_5453.JPG

    Comment

    • arnie84
      Senior Member
      • Oct 2009
      • 236

      #3
      Respond to thread and add more pictures add price too they frown on that

      Comment

      • hobby_man
        Senior Member
        • Sep 2011
        • 103

        #4
        IMG_5449.JPGIMG_5451.JPGIMG_5452.JPG

        Comment

        • hobby_man
          Senior Member
          • Sep 2011
          • 103

          #5
          $300

          Comment

          • pistol18
            Senior Member
            • Sep 2012
            • 248

            #6
            Love my MC and Lucas too!

            Did you hit 49 mph with the plastic prop?

            Comment

            • hobby_man
              Senior Member
              • Sep 2011
              • 103

              #7
              No sir I used a aluminum propeller cnc 4214250 got here on Offshore

              They kept breaking off one of the tips on the propeller after 3 of them I went back to plastic
              Last edited by hobby_man; 10-01-2014, 06:22 PM.

              Comment

              Working...