Tweet
This is a aeromarine avenger pro that I bought two years ago from Bonzi sports. It was purchased as a used boat with a burnt esc. It originally had an older castle 240hv and a leopard 5698 910kv. I Threw the old esc in the trash and replaced it and the motor with a new castle 200hv and Leopard 5698 720kv. I ran this boat twice since then. once on 8s, and another time on 10s with a carbon 455. It gps'd in the low 50's. The boat was a fine design marine build, and it was seems to be set up correctly because it runs and carve turns really nice with no handling issues. The hull is in good shape. I would say a 7 out of 10. Some minor nicks and scratches. The boat has vinyl decals, and one of them is a little splotchy because I cleaned it too vigorously with simple green. Also the hull deck & bottom where it was joined in the front was filled by someone with some sort of filler that doesn't look too appealing. I was gonna paint over it but its underneath and you can't really see it anyway unless you flip it upside down. Was selling as an ARTR. But decided to split it up. Hull and hardware only including motor mount/flex shaft/ collet for 8mm motor shaft/steering servo. $275/shipped to the lower 48 states only. Motor and esc have been re-posted to a different thread.
-
Last edited by forescott; 06-27-2014, 12:03 AM. -
more pics.... -
more....Comment
-
...........Comment
-
Ad change bump...Comment
-
Hull and hardware 300/shipped.Comment
-
275/shipped U.S. Ebay here I come!!Comment
-
Any trades for hull and hardware? Esc, motor, lipo??Comment
Comment