Carbon Fiber FC Daytona Twin

[steinersamuel]

PRICE REDUCED
This boat will need to be finished!
comes with FC 110mm stingers with shims (mounted), kinetic rudder, servo mount, hatch hardware, and other ods and ends needed. Has custom mono jeff chameleon orange FC vinyl decals! Looks awesome!!!

MOTORS AND BATTERIES IN THE PICTURE ARE NOT INCLUDED

This was my dream rig, but times are tough and don't have a choice rite now.
I'm not for sure what kind of $ this should bring, so I'm putting a "starting price" and we can work from there. open to offers and suggestions folks.

$300

will consider trades

[Evan Banul]

I'm interested... can you please send me some more photos of the top and inside?

Thanks

[steinersamuel]

I sure will Evan. soon as i get home

[steinersamuel]

More pics


Sent from my iPhone using Tapatalk

[tjdabomb]

love that CF look.....

[kookie_guy]

Any interest in parting out the motors and mounts? That's exactly what I am looking for.

[steinersamuel]

Sorry kookie, not at this time. will let you know if something changes.

[eboat]

Do the motor mounts you have on the motors in the picture fit down in the sponsons very well ?
One picture of the inside of the boat with nothing in it it looks like there are 4 holes on the floor near the back Do they go right through the floor or only part way ?

[steinersamuel]

they are not the ideal mounts for this rig. they can be made to work, but the mounts that are just a flat piece of carbon are the ideal choice. i bought them and realized how wide they were and figured i would make them work or sell them for the perfect ones. holes are for the servo mount and yes thru holed. this is how its done with a push pull twin setup in most cases. they are a very flat headed screw and once on plane are a non issue. some people with single cats will use a "butch block" to mount the stuffing tube instead of glassing, same concept.

[steinersamuel]

I would consider $350 for the hull and hardware. again, I'M OPEN TO OFFERS!
Never thought this would last this long.
the bottom of this boat is the sharpest and straightest I've seen for not being worked on.
Motivated to move people.

[eboat]

What size cable is needed to fit in the stub shafts ?
Can I see a picture of the bottom of the boat and where the 4 holes come through
Do you have the collets for the motor to the cable ?
What type are they ? (never really liked the ones that are just allen screws on both ends)

Considering making an offer

[Spartanator]

Are the X442's left and right rotation?
Interested in the Zippy lipos, would you sell them separately? What C rating?

[steinersamuel]

eboat
I believe the cables will need to be 3/16 squared end cables don't quote me. i have collets for the motors, they are used. FYI. the couplers that have set screws at both ends are couplers. collets feature a set screw at the motor shaft and a "collet" at the other to grip the cable. Never use a coupler for a cable setup as it will destroy the cable
I do not have any pics of the bottom, rest assured, its as it should be. if you don't like the holes, i can epoxy them up for you and send you a regular lay- down style servo mount, but you will not be able to run a push pull setup this way. With a rig capable of the speeds this boat can reach, in my opinion, a push pull rudder linkage is the only way to go.
please make an offer, she's gonna go to flea bay if this doesn't go soon

[steinersamuel]

Spartanator
zippy's are 40c, and the props are counter rotating. also have a pair of 447's
Not ready to split this up until eboat figures out what he's gonna do. Will keep you posted!!

[Spartanator]

Ok, just keep us posted! Thanks!